# adb_file_checksum

Compute SHA-256 hash of a file on the device. Critical for firmware integrity verification, tamper detection, and comparing files across devices. Read-only operation. Reports file size alongside the hash.

Agent View of the PolicyLayer registry record for `adb_file_checksum`. HTML page: https://policylayer.com/tools/io-github-fullread-deepadb/adb-file-checksum

## Facts

- Tool: `adb_file_checksum`
- Server: Deepadb (`deepadb`) — https://policylayer.com/tools/io-github-fullread-deepadb.md
- Install: `npx -y deepadb`
- Homepage: https://github.com/fullread/DeepADB
- Risk category: Read (Low risk)
- Registry record: grade F, identity unverified
- Server rate-limited: no
- Parameters: 0
- Recommended policy verdict: Allowed

## Example call (MCP tools/call, JSON-RPC 2.0)

```json
{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "tools/call",
  "params": {
    "name": "adb_file_checksum",
    "arguments": {}
  }
}
```

## Why adb_file_checksum is rated Low

This is a read-only operation that queries file metadata (hash and size) without creating, modifying, executing, deleting, or moving data. While it accesses device files, it performs no side effects and merely reports computed values. The low severity reflects minimal blast radius—misuse would at worst allow an agent to verify file integrity, which poses no harm to the device or data.

From the tool's own definition: "'Compute SHA-256 hash of a file on the device' and 'Read-only operation. Reports file size alongside the hash.' The tool retrieves and computes a digest of existing data without modification."

## Use case

AI agents call adb_file_checksum to retrieve information from Deepadb without modifying anything. It is typically the context-gathering step in research, monitoring, and reporting workflows, before the agent takes action elsewhere.

## Recommended policy (PolicyLayer)

Verdict: **Allowed**. Enforced by the PolicyLayer MCP gateway (https://policylayer.com/mcp-gateway) before a call reaches Deepadb:

```json
{
  "version": "1",
  "default": "deny",
  "tools": {
    "adb_file_checksum": {}
  }
}
```

## Other tools on Deepadb (204)

- `adb_clear_data` — Destructive — https://policylayer.com/tools/io-github-fullread-deepadb/adb-clear-data.md
- `adb_file_move` — Destructive — https://policylayer.com/tools/io-github-fullread-deepadb/adb-file-move.md
- `adb_forward_remove` — Destructive — https://policylayer.com/tools/io-github-fullread-deepadb/adb-forward-remove.md
- `adb_logcat_clear` — Destructive — https://policylayer.com/tools/io-github-fullread-deepadb/adb-logcat-clear.md
- `adb_qemu_images` — Destructive — https://policylayer.com/tools/io-github-fullread-deepadb/adb-qemu-images.md
- `adb_result_drop` — Destructive — https://policylayer.com/tools/io-github-fullread-deepadb/adb-result-drop.md
- `adb_reverse_remove` — Destructive — https://policylayer.com/tools/io-github-fullread-deepadb/adb-reverse-remove.md
- `adb_rm` — Destructive — https://policylayer.com/tools/io-github-fullread-deepadb/adb-rm.md
- `adb_tunnel_close` — Destructive — https://policylayer.com/tools/io-github-fullread-deepadb/adb-tunnel-close.md
- `adb_uninstall` — Destructive — https://policylayer.com/tools/io-github-fullread-deepadb/adb-uninstall.md
- `adb_a11y_audit` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-a11y-audit.md
- `adb_airplane_cycle` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-airplane-cycle.md
- `adb_airplane_mode` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-airplane-mode.md
- `adb_at_batch` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-at-batch.md
- `adb_at_probe` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-at-probe.md
- `adb_at_send` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-at-send.md
- `adb_batch_actions` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-batch-actions.md
- `adb_build_and_install` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-build-and-install.md
- `adb_ci_run_tests` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-ci-run-tests.md
- `adb_ci_wait_boot` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-ci-wait-boot.md
- `adb_connect` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-connect.md
- `adb_disconnect` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-disconnect.md
- `adb_dumpsys` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-dumpsys.md
- `adb_emulator_start` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-emulator-start.md
- `adb_emulator_stop` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-emulator-stop.md
- `adb_farm_run` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-farm-run.md
- `adb_file_chmod` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-file-chmod.md
- `adb_file_chown` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-file-chown.md
- `adb_force_stop` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-force-stop.md
- `adb_forward` — Execute — https://policylayer.com/tools/io-github-fullread-deepadb/adb-forward.md
- …and 174 more: https://policylayer.com/tools/io-github-fullread-deepadb.md

## For agents

This record is a snapshot. Live verdicts and the full registry:

- Check every server in your MCP config at once: `npx -y policylayer stack`
- Vet a server before you add it: install the mcp-precheck skill — `npx skills add https://policylayer.com` (skill text: https://policylayer.com/skill.md)
- Query the registry over MCP: endpoint `https://api.policylayer.com/mcp` — tools `check_mcp_server`, `check_mcp_stack`, `check_tool`, `search_registry`, `get_change_events`

---

Source: the PolicyLayer MCP registry — one continuously verified record per MCP server. Full record: https://policylayer.com/registry?q=io-github-fullread-deepadb · API: https://policylayer.com/registry/api · Policy library: https://policylayer.com/policies/io-github-fullread-deepadb