# prepare_curve_add_liquidity

Build an unsigned Curve add_liquidity transaction for a stable_ng plain pool on Ethereum. Bundles ERC-20 approvals (one per non-zero deposit slot) before the action call via chainApproval. Pass amounts as a decimal-string array matching the pool's N_COINS (use '0' for slots you're not depositing into — single-coin deposit). Slippage gate is REQUIRED: pass either minLpOut (explicit decimal-string uint256) OR slippageBps (server computes via calc_token_amount * (1 - bps/10000)). v0.1 scope: stable_ng plain pools only — meta pools rejected. Use get_curve_positions to discover valid pool addresses + their coin order before calling this.

Agent View of the PolicyLayer registry record for `prepare_curve_add_liquidity`. HTML page: https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-curve-add-liquidity

## Facts

- Tool: `prepare_curve_add_liquidity`
- Server: VaultPilot MCP (`vaultpilot-mcp`) — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp.md
- Install: `npx -y vaultpilot-mcp`
- Homepage: https://github.com/szhygulin/vaultpilot-mcp
- Risk category: Write (Medium risk)
- Registry record: grade F, identity unverified
- Server rate-limited: no
- Parameters: 6 (3 required)
- Recommended policy verdict: Rate-limited

## Parameters

| Parameter | Type | Required | Description |
| --- | --- | --- | --- |
| `pool` | string | yes | Pool address (== LP token address on stable_ng). Must be a stable_ng plain pool — meta pools rejected with a clear error in v0.1; use `get_curve_positions` to d |
| `wallet` | string | yes | 0x EVM wallet address that will sign the tx. |
| `amounts` | array | yes | Per-coin deposit amounts as decimal-string-encoded uint256, in the order returned by `get_curve_positions(...).coins`. Length must match the pool's N_COINS. Pas |
| `minLpOut` | string | no | Explicit minimum LP tokens to receive (decimal-string uint256). Passes through to the pool's `add_liquidity(amounts, min_mint_amount)`. Either `minLpOut` or `sl |
| `approvalCap` | string | no | Cap on the ERC-20 approval preceding this action. Omit for "unlimited" (standard DeFi UX — fewer follow-up approvals). Pass "exact" to approve only what this ac |
| `slippageBps` | integer | no | Server-side slippage allowance in basis points (e.g. 50 = 0.5%). When set, `minLpOut = calc_token_amount * (1 - slippageBps / 10000)`. Capped at 10% (1000 bps) |

Parameters from the server's own tool schema.

## Example call (MCP tools/call, JSON-RPC 2.0)

```json
{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "tools/call",
  "params": {
    "name": "prepare_curve_add_liquidity",
    "arguments": {
      "pool": "<pool>",
      "wallet": "<wallet>",
      "amounts": []
    }
  }
}
```

## Why prepare_curve_add_liquidity is rated Medium

This tool creates a financial transaction that moves and locks user assets into a Curve liquidity pool. While the transaction is unsigned (requiring additional authorization before execution), the tool itself constructs the write operation that commits capital.

From the tool's own definition: "Tool builds an unsigned transaction for 'add_liquidity' on Curve, which 'creates or modifies data reversibly' by depositing assets into a liquidity pool."

## Use case

AI agents use prepare_curve_add_liquidity to create or update resources in VaultPilot MCP, usually the action step of a workflow, after the agent has gathered context. Every call changes real data in your VaultPilot MCP environment.

## Recommended policy (PolicyLayer)

Verdict: **Rate-limited**. Enforced by the PolicyLayer MCP gateway (https://policylayer.com/mcp-gateway) before a call reaches VaultPilot MCP:

```json
{
  "version": "1",
  "default": "deny",
  "tools": {
    "prepare_curve_add_liquidity": {
      "limits": [
        {
          "counter": "prepare_curve_add_liquidity_rate",
          "window": "minute",
          "max": 30,
          "scope": "grant"
        }
      ]
    }
  }
}
```

## Other tools on VaultPilot MCP (188)

- `prepare_btc_lifi_swap` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-btc-lifi-swap.md
- `prepare_btc_rbf_bump` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-btc-rbf-bump.md
- `prepare_jito_stake` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-jito-stake.md
- `prepare_marginfi_init` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-marginfi-init.md
- `prepare_solana_nonce_close` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-solana-nonce-close.md
- `prepare_sunswap_swap` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-sunswap-swap.md
- `prepare_uniswap_v3_burn` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-uniswap-v3-burn.md
- `prepare_uniswap_v3_mint` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-uniswap-v3-mint.md
- `remove_contact` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/remove-contact.md
- `unregister_btc_multisig_wallet` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/unregister-btc-multisig-wallet.md
- `combine_btc_psbts` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/combine-btc-psbts.md
- `pair_ledger_btc` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/pair-ledger-btc.md
- `prepare_aave_repay` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-aave-repay.md
- `prepare_btc_multisig_send` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-btc-multisig-send.md
- `prepare_compound_repay` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-compound-repay.md
- `prepare_compound_supply` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-compound-supply.md
- `prepare_curve_swap` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-curve-swap.md
- `prepare_custom_call` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-custom-call.md
- `prepare_kamino_init_user` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-kamino-init-user.md
- `prepare_kamino_supply` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-kamino-supply.md
- `prepare_lido_unstake` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-lido-unstake.md
- `prepare_lido_unwrap` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-lido-unwrap.md
- `prepare_lido_wrap` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-lido-wrap.md
- `prepare_native_stake_deactivate` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-native-stake-deactivate.md
- `prepare_native_stake_delegate` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-native-stake-delegate.md
- `prepare_rocketpool_unstake` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-rocketpool-unstake.md
- `prepare_safe_tx_execute` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-safe-tx-execute.md
- `prepare_solana_lifi_swap` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-solana-lifi-swap.md
- `prepare_solana_nonce_init` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-solana-nonce-init.md
- `prepare_solana_swap` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-solana-swap.md
- …and 158 more: https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp.md

## For agents

This record is a snapshot. Live verdicts and the full registry:

- Check every server in your MCP config at once: `npx -y policylayer stack`
- Vet a server before you add it: install the mcp-precheck skill — `npx skills add https://policylayer.com` (skill text: https://policylayer.com/skill.md)
- Query the registry over MCP: endpoint `https://api.policylayer.com/mcp` — tools `check_mcp_server`, `check_mcp_stack`, `check_tool`, `search_registry`, `get_change_events`

---

Source: the PolicyLayer MCP registry — one continuously verified record per MCP server. Full record: https://policylayer.com/registry?q=io-github-szhygulin-vaultpilot-mcp · API: https://policylayer.com/registry/api · Policy library: https://policylayer.com/policies/io-github-szhygulin-vaultpilot-mcp