# prepare_uniswap_v3_increase_liquidity

Build an unsigned Uniswap V3 LP increaseLiquidity transaction — adds liquidity to an existing position identified by tokenId. Reads the position's (token0, token1, fee, tickLower, tickUpper) on-chain via positions(tokenId), so the caller only supplies the tokenId + amounts. Hard-refuses when the tokenId is not owned by wallet (the on-chain call would still succeed and route the deposit into someone else's position — the position owner gets the new liquidity). Use get_lp_positions to enumerate the wallet's tokenIds. Up to two ERC-20 approvals are chained ahead of the increaseLiquidity() call. v1 limitation: only WETH (not native ETH) is supported as a pair side; wrap ETH first via prepare_native_send to the WETH contract. Slippage defaults to 50 bps (0.5%); soft cap at 100 bps requires acknowledgeHighSlippage: true. Pass amount0Desired: "0" (or amount1Desired) for a single-sided range deposit when the current price is outside the position's range.

Agent View of the PolicyLayer registry record for `prepare_uniswap_v3_increase_liquidity`. HTML page: https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-uniswap-v3-increase-liquidity

## Facts

- Tool: `prepare_uniswap_v3_increase_liquidity`
- Server: VaultPilot MCP (`vaultpilot-mcp`) — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp.md
- Install: `npx -y vaultpilot-mcp`
- Homepage: https://github.com/szhygulin/vaultpilot-mcp
- Risk category: Execute (High risk)
- Registry record: grade F, identity unverified
- Server rate-limited: no
- Parameters: 9 (4 required)
- Recommended policy verdict: Rate-limited

## Parameters

| Parameter | Type | Required | Description |
| --- | --- | --- | --- |
| `chain` | string | no |  |
| `wallet` | string | yes |  |
| `tokenId` | string | yes | ERC-721 tokenId of the Uniswap V3 LP NFT to add liquidity to. The position must be owned by `wallet` — the builder reads ownerOf(tokenId) and refuses if it does |
| `approvalCap` | string | no | Cap on the ERC-20 approval preceding this action. Omit for "unlimited" (standard DeFi UX — fewer follow-up approvals). Pass "exact" to approve only what this ac |
| `deadlineSec` | integer | no | Seconds from now until the on-chain `deadline` parameter expires. Default 1200 (20 min). |
| `slippageBps` | integer | no | Slippage tolerance in basis points (1 bp = 0.01%). Default 50 bps (0.5%). Hard ceiling 500 bps; soft cap 100 bps requires acknowledgeHighSlippage: true. |
| `amount0Desired` | string | yes | Human-readable decimal amount of the position's token0 to add. NOT raw wei. Pass "0" for a single-sided range deposit when the current price is outside the posi |
| `amount1Desired` | string | yes | Human-readable decimal amount of the position's token1. Same shape as amount0Desired. |
| `acknowledgeHighSlippage` | boolean | no | Required when slippageBps is in (100, 500]. Surface the trade-off to the user before proceeding. |

Parameters from the server's own tool schema.

## Example call (MCP tools/call, JSON-RPC 2.0)

```json
{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "tools/call",
  "params": {
    "name": "prepare_uniswap_v3_increase_liquidity",
    "arguments": {
      "wallet": "<wallet>",
      "tokenId": "<tokenId>",
      "amount0Desired": "<amount0Desired>",
      "amount1Desired": "<amount1Desired>"
    }
  }
}
```

## Why prepare_uniswap_v3_increase_liquidity is rated High

prepare_uniswap_v3_increase_liquidity triggers real processes with real consequences. An agent gone sideways doesn't fire it once. It starts dozens of builds, sends mass notifications, or burns through compute before anyone looks up.

## Use case

AI agents invoke prepare_uniswap_v3_increase_liquidity to trigger actions in VaultPilot MCP. What it does depends on the arguments the agent supplies, and its effects often reach beyond the immediate call: builds kicked off, notifications sent, workflows started.

## Recommended policy (PolicyLayer)

Verdict: **Rate-limited**. Enforced by the PolicyLayer MCP gateway (https://policylayer.com/mcp-gateway) before a call reaches VaultPilot MCP:

```json
{
  "version": "1",
  "default": "deny",
  "tools": {
    "prepare_uniswap_v3_increase_liquidity": {
      "limits": [
        {
          "counter": "prepare_uniswap_v3_increase_liquidity_rate",
          "window": "minute",
          "max": 10,
          "scope": "grant"
        }
      ]
    }
  }
}
```

## Other tools on VaultPilot MCP (188)

- `prepare_btc_lifi_swap` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-btc-lifi-swap.md
- `prepare_btc_rbf_bump` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-btc-rbf-bump.md
- `prepare_jito_stake` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-jito-stake.md
- `prepare_marginfi_init` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-marginfi-init.md
- `prepare_solana_nonce_close` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-solana-nonce-close.md
- `prepare_sunswap_swap` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-sunswap-swap.md
- `prepare_uniswap_v3_burn` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-uniswap-v3-burn.md
- `prepare_uniswap_v3_mint` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-uniswap-v3-mint.md
- `remove_contact` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/remove-contact.md
- `unregister_btc_multisig_wallet` — Destructive — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/unregister-btc-multisig-wallet.md
- `combine_btc_psbts` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/combine-btc-psbts.md
- `pair_ledger_btc` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/pair-ledger-btc.md
- `prepare_aave_repay` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-aave-repay.md
- `prepare_btc_multisig_send` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-btc-multisig-send.md
- `prepare_compound_repay` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-compound-repay.md
- `prepare_compound_supply` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-compound-supply.md
- `prepare_curve_swap` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-curve-swap.md
- `prepare_custom_call` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-custom-call.md
- `prepare_kamino_init_user` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-kamino-init-user.md
- `prepare_kamino_supply` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-kamino-supply.md
- `prepare_lido_unstake` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-lido-unstake.md
- `prepare_lido_unwrap` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-lido-unwrap.md
- `prepare_lido_wrap` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-lido-wrap.md
- `prepare_native_stake_deactivate` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-native-stake-deactivate.md
- `prepare_native_stake_delegate` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-native-stake-delegate.md
- `prepare_rocketpool_unstake` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-rocketpool-unstake.md
- `prepare_safe_tx_execute` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-safe-tx-execute.md
- `prepare_solana_lifi_swap` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-solana-lifi-swap.md
- `prepare_solana_nonce_init` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-solana-nonce-init.md
- `prepare_solana_swap` — Execute — https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp/prepare-solana-swap.md
- …and 158 more: https://policylayer.com/tools/io-github-szhygulin-vaultpilot-mcp.md

## For agents

This record is a snapshot. Live verdicts and the full registry:

- Check every server in your MCP config at once: `npx -y policylayer stack`
- Vet a server before you add it: install the mcp-precheck skill — `npx skills add https://policylayer.com` (skill text: https://policylayer.com/skill.md)
- Query the registry over MCP: endpoint `https://api.policylayer.com/mcp` — tools `check_mcp_server`, `check_mcp_stack`, `check_tool`, `search_registry`, `get_change_events`

---

Source: the PolicyLayer MCP registry — one continuously verified record per MCP server. Full record: https://policylayer.com/registry?q=io-github-szhygulin-vaultpilot-mcp · API: https://policylayer.com/registry/api · Policy library: https://policylayer.com/policies/io-github-szhygulin-vaultpilot-mcp