# first_layer_status

Check the status of a first-layer monitor.

Agent View of the PolicyLayer registry record for `first_layer_status`. HTML page: https://policylayer.com/tools/kiln/first-layer-status

## Facts

- Tool: `first_layer_status`
- Server: Kiln (`codeofaxel/Kiln`) — https://policylayer.com/tools/kiln.md
- Homepage: https://github.com/codeofaxel/Kiln
- Risk category: Read (Low risk)
- Registry record: grade F, identity unverified
- Server rate-limited: no
- Parameters: 0
- Recommended policy verdict: Allowed

## Example call (MCP tools/call, JSON-RPC 2.0)

```json
{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "tools/call",
  "params": {
    "name": "first_layer_status",
    "arguments": {}
  }
}
```

## Why first_layer_status is rated Low

This tool retrieves the current state of a first-layer monitoring system without modifying, executing, or deleting anything. It is a read-only operation typical of monitoring or diagnostic queries in 3D printer control systems. The low severity reflects minimal risk even if misused by an agent, as it only exposes status information.

From the tool's own definition: "Tool name 'first_layer_status' and description 'Check the status of a first-layer monitor' indicate a query/status-check operation with no side effects."

## Use case

AI agents call first_layer_status to retrieve information from Kiln without modifying anything. It is typically the context-gathering step in research, monitoring, and reporting workflows, before the agent takes action elsewhere.

## Recommended policy (PolicyLayer)

Verdict: **Allowed**. Enforced by the PolicyLayer MCP gateway (https://policylayer.com/mcp-gateway) before a call reaches Kiln:

```json
{
  "version": "1",
  "default": "deny",
  "tools": {
    "first_layer_status": {}
  }
}
```

## Other tools on Kiln (401)

- `cancel_print` — Destructive — https://policylayer.com/tools/kiln/cancel-print.md
- `cancel_print_recovery` — Destructive — https://policylayer.com/tools/kiln/cancel-print-recovery.md
- `cancel_print_service_order` — Destructive — https://policylayer.com/tools/kiln/cancel-print-service-order.md
- `cancel_split_plan` — Destructive — https://policylayer.com/tools/kiln/cancel-split-plan.md
- `delete_agent_note` — Destructive — https://policylayer.com/tools/kiln/delete-agent-note.md
- `delete_cached_model` — Destructive — https://policylayer.com/tools/kiln/delete-cached-model.md
- `delete_file` — Destructive — https://policylayer.com/tools/kiln/delete-file.md
- `delete_shipping_profile` — Destructive — https://policylayer.com/tools/kiln/delete-shipping-profile.md
- `fulfillment_cancel` — Destructive — https://policylayer.com/tools/kiln/fulfillment-cancel.md
- `remove_mesh_floating_regions` — Destructive — https://policylayer.com/tools/kiln/remove-mesh-floating-regions.md
- `remove_spool` — Destructive — https://policylayer.com/tools/kiln/remove-spool.md
- `rollback_design_version` — Destructive — https://policylayer.com/tools/kiln/rollback-design-version.md
- `rollback_firmware` — Destructive — https://policylayer.com/tools/kiln/rollback-firmware.md
- `untrust_printer` — Destructive — https://policylayer.com/tools/kiln/untrust-printer.md
- `acquire_printer_lock` — Execute — https://policylayer.com/tools/kiln/acquire-printer-lock.md
- `arrange_parts_on_plate` — Execute — https://policylayer.com/tools/kiln/arrange-parts-on-plate.md
- `auto_arrange_parts_on_plate` — Execute — https://policylayer.com/tools/kiln/auto-arrange-parts-on-plate.md
- `auto_orient_model` — Execute — https://policylayer.com/tools/kiln/auto-orient-model.md
- `await_print_completion` — Execute — https://policylayer.com/tools/kiln/await-print-completion.md
- `boolean_mesh_op` — Execute — https://policylayer.com/tools/kiln/boolean-mesh-op.md
- `calibrate_direct` — Execute — https://policylayer.com/tools/kiln/calibrate-direct.md
- `clear_emergency_stop` — Execute — https://policylayer.com/tools/kiln/clear-emergency-stop.md
- `compile_scad` — Execute — https://policylayer.com/tools/kiln/compile-scad.md
- `complete_print_recovery` — Execute — https://policylayer.com/tools/kiln/complete-print-recovery.md
- `confirm_print_recovery` — Execute — https://policylayer.com/tools/kiln/confirm-print-recovery.md
- `design_to_gcode_pipeline` — Execute — https://policylayer.com/tools/kiln/design-to-gcode-pipeline.md
- `emergency_stop` — Execute — https://policylayer.com/tools/kiln/emergency-stop.md
- `emergency_trip_input` — Execute — https://policylayer.com/tools/kiln/emergency-trip-input.md
- `firmware_resume_print` — Execute — https://policylayer.com/tools/kiln/firmware-resume-print.md
- `force_print_oversize` — Execute — https://policylayer.com/tools/kiln/force-print-oversize.md
- …and 371 more: https://policylayer.com/tools/kiln.md

## For agents

This record is a snapshot. Live verdicts and the full registry:

- Check every server in your MCP config at once: `npx -y policylayer stack`
- Vet a server before you add it: install the mcp-precheck skill — `npx skills add https://policylayer.com` (skill text: https://policylayer.com/skill.md)
- Query the registry over MCP: endpoint `https://api.policylayer.com/mcp` — tools `check_mcp_server`, `check_mcp_stack`, `check_tool`, `search_registry`, `get_change_events`

---

Source: the PolicyLayer MCP registry — one continuously verified record per MCP server. Full record: https://policylayer.com/registry?q=kiln · API: https://policylayer.com/registry/api · Policy library: https://policylayer.com/policies/kiln