# get_recovery_session_status

Get the current status of a recovery session.

Agent View of the PolicyLayer registry record for `get_recovery_session_status`. HTML page: https://policylayer.com/tools/kiln/get-recovery-session-status

## Facts

- Tool: `get_recovery_session_status`
- Server: Kiln (`codeofaxel/Kiln`) — https://policylayer.com/tools/kiln.md
- Homepage: https://github.com/codeofaxel/Kiln
- Risk category: Read (Low risk)
- Registry record: grade F, identity unverified
- Server rate-limited: no
- Parameters: 0
- Recommended policy verdict: Allowed

## Example call (MCP tools/call, JSON-RPC 2.0)

```json
{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "tools/call",
  "params": {
    "name": "get_recovery_session_status",
    "arguments": {}
  }
}
```

## Why get_recovery_session_status is rated Low

This tool retrieves status information about a recovery session without modifying, executing, or destructively affecting any data or hardware state. It is a straightforward information retrieval operation. In the context of 3D printer control, querying recovery session status poses minimal risk—it does not trigger print operations, modify configurations, or delete data.

From the tool's own definition: "Tool name 'get_recovery_session_status' and description 'Get the current status of a recovery session' indicate a retrieval operation with no side effects. The verb 'Get' and action of checking status are characteristic of read-only queries."

## Use case

AI agents call get_recovery_session_status to retrieve information from Kiln without modifying anything. It is typically the context-gathering step in research, monitoring, and reporting workflows, before the agent takes action elsewhere.

## Recommended policy (PolicyLayer)

Verdict: **Allowed**. Enforced by the PolicyLayer MCP gateway (https://policylayer.com/mcp-gateway) before a call reaches Kiln:

```json
{
  "version": "1",
  "default": "deny",
  "tools": {
    "get_recovery_session_status": {}
  }
}
```

## Other tools on Kiln (401)

- `cancel_print` — Destructive — https://policylayer.com/tools/kiln/cancel-print.md
- `cancel_print_recovery` — Destructive — https://policylayer.com/tools/kiln/cancel-print-recovery.md
- `cancel_print_service_order` — Destructive — https://policylayer.com/tools/kiln/cancel-print-service-order.md
- `cancel_split_plan` — Destructive — https://policylayer.com/tools/kiln/cancel-split-plan.md
- `delete_agent_note` — Destructive — https://policylayer.com/tools/kiln/delete-agent-note.md
- `delete_cached_model` — Destructive — https://policylayer.com/tools/kiln/delete-cached-model.md
- `delete_file` — Destructive — https://policylayer.com/tools/kiln/delete-file.md
- `delete_shipping_profile` — Destructive — https://policylayer.com/tools/kiln/delete-shipping-profile.md
- `fulfillment_cancel` — Destructive — https://policylayer.com/tools/kiln/fulfillment-cancel.md
- `remove_mesh_floating_regions` — Destructive — https://policylayer.com/tools/kiln/remove-mesh-floating-regions.md
- `remove_spool` — Destructive — https://policylayer.com/tools/kiln/remove-spool.md
- `rollback_design_version` — Destructive — https://policylayer.com/tools/kiln/rollback-design-version.md
- `rollback_firmware` — Destructive — https://policylayer.com/tools/kiln/rollback-firmware.md
- `untrust_printer` — Destructive — https://policylayer.com/tools/kiln/untrust-printer.md
- `acquire_printer_lock` — Execute — https://policylayer.com/tools/kiln/acquire-printer-lock.md
- `arrange_parts_on_plate` — Execute — https://policylayer.com/tools/kiln/arrange-parts-on-plate.md
- `auto_arrange_parts_on_plate` — Execute — https://policylayer.com/tools/kiln/auto-arrange-parts-on-plate.md
- `auto_orient_model` — Execute — https://policylayer.com/tools/kiln/auto-orient-model.md
- `await_print_completion` — Execute — https://policylayer.com/tools/kiln/await-print-completion.md
- `boolean_mesh_op` — Execute — https://policylayer.com/tools/kiln/boolean-mesh-op.md
- `calibrate_direct` — Execute — https://policylayer.com/tools/kiln/calibrate-direct.md
- `clear_emergency_stop` — Execute — https://policylayer.com/tools/kiln/clear-emergency-stop.md
- `compile_scad` — Execute — https://policylayer.com/tools/kiln/compile-scad.md
- `complete_print_recovery` — Execute — https://policylayer.com/tools/kiln/complete-print-recovery.md
- `confirm_print_recovery` — Execute — https://policylayer.com/tools/kiln/confirm-print-recovery.md
- `design_to_gcode_pipeline` — Execute — https://policylayer.com/tools/kiln/design-to-gcode-pipeline.md
- `emergency_stop` — Execute — https://policylayer.com/tools/kiln/emergency-stop.md
- `emergency_trip_input` — Execute — https://policylayer.com/tools/kiln/emergency-trip-input.md
- `firmware_resume_print` — Execute — https://policylayer.com/tools/kiln/firmware-resume-print.md
- `force_print_oversize` — Execute — https://policylayer.com/tools/kiln/force-print-oversize.md
- …and 371 more: https://policylayer.com/tools/kiln.md

## For agents

This record is a snapshot. Live verdicts and the full registry:

- Check every server in your MCP config at once: `npx -y policylayer stack`
- Vet a server before you add it: install the mcp-precheck skill — `npx skills add https://policylayer.com` (skill text: https://policylayer.com/skill.md)
- Query the registry over MCP: endpoint `https://api.policylayer.com/mcp` — tools `check_mcp_server`, `check_mcp_stack`, `check_tool`, `search_registry`, `get_change_events`

---

Source: the PolicyLayer MCP registry — one continuously verified record per MCP server. Full record: https://policylayer.com/registry?q=kiln · API: https://policylayer.com/registry/api · Policy library: https://policylayer.com/policies/kiln