# reprint_with_material

A execute tool on the Kiln MCP server.

Agent View of the PolicyLayer registry record for `reprint_with_material`. HTML page: https://policylayer.com/tools/kiln/reprint-with-material

## Facts

- Tool: `reprint_with_material`
- Server: Kiln (`codeofaxel/Kiln`) — https://policylayer.com/tools/kiln.md
- Homepage: https://github.com/codeofaxel/Kiln
- Risk category: Execute (High risk)
- Registry record: grade F, identity unverified
- Server rate-limited: no
- Parameters: 0
- Recommended policy verdict: Rate-limited

## Example call (MCP tools/call, JSON-RPC 2.0)

```json
{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "tools/call",
  "params": {
    "name": "reprint_with_material",
    "arguments": {}
  }
}
```

## Why reprint_with_material is rated High

Based on the name, this tool likely triggers a reprint job on a 3D printer using a specified material, which constitutes an external operation (starting a physical print job). This falls under Execute as it triggers external operations. Severity is high because misuse could waste materials, damage equipment, or cause physical hazards. Confidence is low due to the empty description.

From the tool's own definition: "Tool name 'reprint_with_material' on a 3D printer control server; description is empty."

## Use case

AI agents invoke reprint_with_material to trigger actions in Kiln. What it does depends on the arguments the agent supplies, and its effects often reach beyond the immediate call: builds kicked off, notifications sent, workflows started.

## Recommended policy (PolicyLayer)

Verdict: **Rate-limited**. Enforced by the PolicyLayer MCP gateway (https://policylayer.com/mcp-gateway) before a call reaches Kiln:

```json
{
  "version": "1",
  "default": "deny",
  "tools": {
    "reprint_with_material": {
      "limits": [
        {
          "counter": "reprint_with_material_rate",
          "window": "minute",
          "max": 10,
          "scope": "grant"
        }
      ]
    }
  }
}
```

## Other tools on Kiln (401)

- `cancel_print` — Destructive — https://policylayer.com/tools/kiln/cancel-print.md
- `cancel_print_recovery` — Destructive — https://policylayer.com/tools/kiln/cancel-print-recovery.md
- `cancel_print_service_order` — Destructive — https://policylayer.com/tools/kiln/cancel-print-service-order.md
- `cancel_split_plan` — Destructive — https://policylayer.com/tools/kiln/cancel-split-plan.md
- `delete_agent_note` — Destructive — https://policylayer.com/tools/kiln/delete-agent-note.md
- `delete_cached_model` — Destructive — https://policylayer.com/tools/kiln/delete-cached-model.md
- `delete_file` — Destructive — https://policylayer.com/tools/kiln/delete-file.md
- `delete_shipping_profile` — Destructive — https://policylayer.com/tools/kiln/delete-shipping-profile.md
- `fulfillment_cancel` — Destructive — https://policylayer.com/tools/kiln/fulfillment-cancel.md
- `remove_mesh_floating_regions` — Destructive — https://policylayer.com/tools/kiln/remove-mesh-floating-regions.md
- `remove_spool` — Destructive — https://policylayer.com/tools/kiln/remove-spool.md
- `rollback_design_version` — Destructive — https://policylayer.com/tools/kiln/rollback-design-version.md
- `rollback_firmware` — Destructive — https://policylayer.com/tools/kiln/rollback-firmware.md
- `untrust_printer` — Destructive — https://policylayer.com/tools/kiln/untrust-printer.md
- `acquire_printer_lock` — Execute — https://policylayer.com/tools/kiln/acquire-printer-lock.md
- `arrange_parts_on_plate` — Execute — https://policylayer.com/tools/kiln/arrange-parts-on-plate.md
- `auto_arrange_parts_on_plate` — Execute — https://policylayer.com/tools/kiln/auto-arrange-parts-on-plate.md
- `auto_orient_model` — Execute — https://policylayer.com/tools/kiln/auto-orient-model.md
- `await_print_completion` — Execute — https://policylayer.com/tools/kiln/await-print-completion.md
- `boolean_mesh_op` — Execute — https://policylayer.com/tools/kiln/boolean-mesh-op.md
- `calibrate_direct` — Execute — https://policylayer.com/tools/kiln/calibrate-direct.md
- `clear_emergency_stop` — Execute — https://policylayer.com/tools/kiln/clear-emergency-stop.md
- `compile_scad` — Execute — https://policylayer.com/tools/kiln/compile-scad.md
- `complete_print_recovery` — Execute — https://policylayer.com/tools/kiln/complete-print-recovery.md
- `confirm_print_recovery` — Execute — https://policylayer.com/tools/kiln/confirm-print-recovery.md
- `design_to_gcode_pipeline` — Execute — https://policylayer.com/tools/kiln/design-to-gcode-pipeline.md
- `emergency_stop` — Execute — https://policylayer.com/tools/kiln/emergency-stop.md
- `emergency_trip_input` — Execute — https://policylayer.com/tools/kiln/emergency-trip-input.md
- `firmware_resume_print` — Execute — https://policylayer.com/tools/kiln/firmware-resume-print.md
- `force_print_oversize` — Execute — https://policylayer.com/tools/kiln/force-print-oversize.md
- …and 371 more: https://policylayer.com/tools/kiln.md

## For agents

This record is a snapshot. Live verdicts and the full registry:

- Check every server in your MCP config at once: `npx -y policylayer stack`
- Vet a server before you add it: install the mcp-precheck skill — `npx skills add https://policylayer.com` (skill text: https://policylayer.com/skill.md)
- Query the registry over MCP: endpoint `https://api.policylayer.com/mcp` — tools `check_mcp_server`, `check_mcp_stack`, `check_tool`, `search_registry`, `get_change_events`

---

Source: the PolicyLayer MCP registry — one continuously verified record per MCP server. Full record: https://policylayer.com/registry?q=kiln · API: https://policylayer.com/registry/api · Policy library: https://policylayer.com/policies/kiln