# trigger_bed_level

Trigger a bed leveling / mesh probe on the printer.

Agent View of the PolicyLayer registry record for `trigger_bed_level`. HTML page: https://policylayer.com/tools/kiln/trigger-bed-level

## Facts

- Tool: `trigger_bed_level`
- Server: Kiln (`codeofaxel/Kiln`) — https://policylayer.com/tools/kiln.md
- Homepage: https://github.com/codeofaxel/Kiln
- Risk category: Execute (High risk)
- Registry record: grade F, identity unverified
- Server rate-limited: no
- Parameters: 0
- Recommended policy verdict: Rate-limited

## Example call (MCP tools/call, JSON-RPC 2.0)

```json
{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "tools/call",
  "params": {
    "name": "trigger_bed_level",
    "arguments": {}
  }
}
```

## Why trigger_bed_level is rated High

This tool triggers an external operation (bed leveling probe) on 3D printer hardware. While not destructive or financial, it is an Execute-category action because it causes the printer to perform an active mechanical procedure. Misuse could damage the printer (probe crash, improper calibration leading to nozzle collision) or waste materials.

From the tool's own definition: "Tool name 'trigger_bed_level' and description 'Trigger a bed leveling / mesh probe on the printer' indicate the tool executes a physical operation on hardware (bed leveling/mesh probe) whose outcome depends on printer state and configuration."

## Use case

AI agents invoke trigger_bed_level to trigger actions in Kiln. What it does depends on the arguments the agent supplies, and its effects often reach beyond the immediate call: builds kicked off, notifications sent, workflows started.

## Recommended policy (PolicyLayer)

Verdict: **Rate-limited**. Enforced by the PolicyLayer MCP gateway (https://policylayer.com/mcp-gateway) before a call reaches Kiln:

```json
{
  "version": "1",
  "default": "deny",
  "tools": {
    "trigger_bed_level": {
      "limits": [
        {
          "counter": "trigger_bed_level_rate",
          "window": "minute",
          "max": 10,
          "scope": "grant"
        }
      ]
    }
  }
}
```

## Other tools on Kiln (401)

- `cancel_print` — Destructive — https://policylayer.com/tools/kiln/cancel-print.md
- `cancel_print_recovery` — Destructive — https://policylayer.com/tools/kiln/cancel-print-recovery.md
- `cancel_print_service_order` — Destructive — https://policylayer.com/tools/kiln/cancel-print-service-order.md
- `cancel_split_plan` — Destructive — https://policylayer.com/tools/kiln/cancel-split-plan.md
- `delete_agent_note` — Destructive — https://policylayer.com/tools/kiln/delete-agent-note.md
- `delete_cached_model` — Destructive — https://policylayer.com/tools/kiln/delete-cached-model.md
- `delete_file` — Destructive — https://policylayer.com/tools/kiln/delete-file.md
- `delete_shipping_profile` — Destructive — https://policylayer.com/tools/kiln/delete-shipping-profile.md
- `fulfillment_cancel` — Destructive — https://policylayer.com/tools/kiln/fulfillment-cancel.md
- `remove_mesh_floating_regions` — Destructive — https://policylayer.com/tools/kiln/remove-mesh-floating-regions.md
- `remove_spool` — Destructive — https://policylayer.com/tools/kiln/remove-spool.md
- `rollback_design_version` — Destructive — https://policylayer.com/tools/kiln/rollback-design-version.md
- `rollback_firmware` — Destructive — https://policylayer.com/tools/kiln/rollback-firmware.md
- `untrust_printer` — Destructive — https://policylayer.com/tools/kiln/untrust-printer.md
- `acquire_printer_lock` — Execute — https://policylayer.com/tools/kiln/acquire-printer-lock.md
- `arrange_parts_on_plate` — Execute — https://policylayer.com/tools/kiln/arrange-parts-on-plate.md
- `auto_arrange_parts_on_plate` — Execute — https://policylayer.com/tools/kiln/auto-arrange-parts-on-plate.md
- `auto_orient_model` — Execute — https://policylayer.com/tools/kiln/auto-orient-model.md
- `await_print_completion` — Execute — https://policylayer.com/tools/kiln/await-print-completion.md
- `boolean_mesh_op` — Execute — https://policylayer.com/tools/kiln/boolean-mesh-op.md
- `calibrate_direct` — Execute — https://policylayer.com/tools/kiln/calibrate-direct.md
- `clear_emergency_stop` — Execute — https://policylayer.com/tools/kiln/clear-emergency-stop.md
- `compile_scad` — Execute — https://policylayer.com/tools/kiln/compile-scad.md
- `complete_print_recovery` — Execute — https://policylayer.com/tools/kiln/complete-print-recovery.md
- `confirm_print_recovery` — Execute — https://policylayer.com/tools/kiln/confirm-print-recovery.md
- `design_to_gcode_pipeline` — Execute — https://policylayer.com/tools/kiln/design-to-gcode-pipeline.md
- `emergency_stop` — Execute — https://policylayer.com/tools/kiln/emergency-stop.md
- `emergency_trip_input` — Execute — https://policylayer.com/tools/kiln/emergency-trip-input.md
- `firmware_resume_print` — Execute — https://policylayer.com/tools/kiln/firmware-resume-print.md
- `force_print_oversize` — Execute — https://policylayer.com/tools/kiln/force-print-oversize.md
- …and 371 more: https://policylayer.com/tools/kiln.md

## For agents

This record is a snapshot. Live verdicts and the full registry:

- Check every server in your MCP config at once: `npx -y policylayer stack`
- Vet a server before you add it: install the mcp-precheck skill — `npx skills add https://policylayer.com` (skill text: https://policylayer.com/skill.md)
- Query the registry over MCP: endpoint `https://api.policylayer.com/mcp` — tools `check_mcp_server`, `check_mcp_stack`, `check_tool`, `search_registry`, `get_change_events`

---

Source: the PolicyLayer MCP registry — one continuously verified record per MCP server. Full record: https://policylayer.com/registry?q=kiln · API: https://policylayer.com/registry/api · Policy library: https://policylayer.com/policies/kiln