# validate_generated_mesh

A read tool on the Kiln MCP server.

Agent View of the PolicyLayer registry record for `validate_generated_mesh`. HTML page: https://policylayer.com/tools/kiln/validate-generated-mesh

## Facts

- Tool: `validate_generated_mesh`
- Server: Kiln (`codeofaxel/Kiln`) — https://policylayer.com/tools/kiln.md
- Homepage: https://github.com/codeofaxel/Kiln
- Risk category: Read (Low risk)
- Registry record: grade F, identity unverified
- Server rate-limited: no
- Parameters: 0
- Recommended policy verdict: Allowed

## Example call (MCP tools/call, JSON-RPC 2.0)

```json
{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "tools/call",
  "params": {
    "name": "validate_generated_mesh",
    "arguments": {}
  }
}
```

## Why validate_generated_mesh is rated Low

The verb 'validate' indicates a check or verification operation rather than creation, deletion, or execution of external commands. In 3D printing workflows, mesh validation is a common read operation that checks geometry for errors without altering the mesh. However, confidence is moderate (0.6) due to the completely empty description, which prevents direct confirmation of the tool's actual behavior and parameters.

From the tool's own definition: "Tool name 'validate_generated_mesh' suggests inspection/validation of mesh data without modification. The empty description and context of 3D printer control (where mesh validation is typically a non-destructive inspection operation) support this…"

## Use case

AI agents call validate_generated_mesh to retrieve information from Kiln without modifying anything. It is typically the context-gathering step in research, monitoring, and reporting workflows, before the agent takes action elsewhere.

## Recommended policy (PolicyLayer)

Verdict: **Allowed**. Enforced by the PolicyLayer MCP gateway (https://policylayer.com/mcp-gateway) before a call reaches Kiln:

```json
{
  "version": "1",
  "default": "deny",
  "tools": {
    "validate_generated_mesh": {}
  }
}
```

## Other tools on Kiln (401)

- `cancel_print` — Destructive — https://policylayer.com/tools/kiln/cancel-print.md
- `cancel_print_recovery` — Destructive — https://policylayer.com/tools/kiln/cancel-print-recovery.md
- `cancel_print_service_order` — Destructive — https://policylayer.com/tools/kiln/cancel-print-service-order.md
- `cancel_split_plan` — Destructive — https://policylayer.com/tools/kiln/cancel-split-plan.md
- `delete_agent_note` — Destructive — https://policylayer.com/tools/kiln/delete-agent-note.md
- `delete_cached_model` — Destructive — https://policylayer.com/tools/kiln/delete-cached-model.md
- `delete_file` — Destructive — https://policylayer.com/tools/kiln/delete-file.md
- `delete_shipping_profile` — Destructive — https://policylayer.com/tools/kiln/delete-shipping-profile.md
- `fulfillment_cancel` — Destructive — https://policylayer.com/tools/kiln/fulfillment-cancel.md
- `remove_mesh_floating_regions` — Destructive — https://policylayer.com/tools/kiln/remove-mesh-floating-regions.md
- `remove_spool` — Destructive — https://policylayer.com/tools/kiln/remove-spool.md
- `rollback_design_version` — Destructive — https://policylayer.com/tools/kiln/rollback-design-version.md
- `rollback_firmware` — Destructive — https://policylayer.com/tools/kiln/rollback-firmware.md
- `untrust_printer` — Destructive — https://policylayer.com/tools/kiln/untrust-printer.md
- `acquire_printer_lock` — Execute — https://policylayer.com/tools/kiln/acquire-printer-lock.md
- `arrange_parts_on_plate` — Execute — https://policylayer.com/tools/kiln/arrange-parts-on-plate.md
- `auto_arrange_parts_on_plate` — Execute — https://policylayer.com/tools/kiln/auto-arrange-parts-on-plate.md
- `auto_orient_model` — Execute — https://policylayer.com/tools/kiln/auto-orient-model.md
- `await_print_completion` — Execute — https://policylayer.com/tools/kiln/await-print-completion.md
- `boolean_mesh_op` — Execute — https://policylayer.com/tools/kiln/boolean-mesh-op.md
- `calibrate_direct` — Execute — https://policylayer.com/tools/kiln/calibrate-direct.md
- `clear_emergency_stop` — Execute — https://policylayer.com/tools/kiln/clear-emergency-stop.md
- `compile_scad` — Execute — https://policylayer.com/tools/kiln/compile-scad.md
- `complete_print_recovery` — Execute — https://policylayer.com/tools/kiln/complete-print-recovery.md
- `confirm_print_recovery` — Execute — https://policylayer.com/tools/kiln/confirm-print-recovery.md
- `design_to_gcode_pipeline` — Execute — https://policylayer.com/tools/kiln/design-to-gcode-pipeline.md
- `emergency_stop` — Execute — https://policylayer.com/tools/kiln/emergency-stop.md
- `emergency_trip_input` — Execute — https://policylayer.com/tools/kiln/emergency-trip-input.md
- `firmware_resume_print` — Execute — https://policylayer.com/tools/kiln/firmware-resume-print.md
- `force_print_oversize` — Execute — https://policylayer.com/tools/kiln/force-print-oversize.md
- …and 371 more: https://policylayer.com/tools/kiln.md

## For agents

This record is a snapshot. Live verdicts and the full registry:

- Check every server in your MCP config at once: `npx -y policylayer stack`
- Vet a server before you add it: install the mcp-precheck skill — `npx skills add https://policylayer.com` (skill text: https://policylayer.com/skill.md)
- Query the registry over MCP: endpoint `https://api.policylayer.com/mcp` — tools `check_mcp_server`, `check_mcp_stack`, `check_tool`, `search_registry`, `get_change_events`

---

Source: the PolicyLayer MCP registry — one continuously verified record per MCP server. Full record: https://policylayer.com/registry?q=kiln · API: https://policylayer.com/registry/api · Policy library: https://policylayer.com/policies/kiln