pfsense_update_firewall_traffic_shaper_limiter

A write tool on the Pfsense MCP server.

SERVERPfsense SOURCEabl030/pfsense-mcp

Medium RISK CLASS

Category Write

Parameters 00 required

Recommended Rate-limitedsee the rule below

Registry record Grade F, identity unverified Pull the record →

This record as markdown: /tools/abl030-pfsense-mcp/pfsense-update-firewall-traffic-shaper-limiter.md

WHAT IT DOES

What pfsense_update_firewall_traffic_shaper_limiter does on Pfsense

AI agents use pfsense_update_firewall_traffic_shaper_limiter to create or update resources in Pfsense, usually the action step of a workflow, after the agent has gathered context. Every call changes real data in your Pfsense environment.

RISK

Why pfsense_update_firewall_traffic_shaper_limiter is rated Medium

This tool modifies firewall traffic shaping limiter settings, which are critical network policy configurations. While reversible (Write rather than Destructive), misconfiguration could degrade network performance or disrupt traffic management across the firewall.

From the tool's definition Tool name indicates 'update' operation on 'firewall_traffic_shaper_limiter'. The server description states it 'gives AI agents full control over pfSense firewalls via the REST API v2' with tools covering 'traffic shaper' management.

Attacks that exploit this kind of access

RECOMMENDED RULE

The rule that runs pfsense_update_firewall_traffic_shaper_limiter safely

PolicyLayer is an MCP gateway: it sits between your AI agents and Pfsense, and checks every tool call against a rule you set before the call runs. Nothing changes on the server itself. For pfsense_update_firewall_traffic_shaper_limiter, this is the rule to start with:

pfsense_update_firewall_traffic_shaper_limiter Rate-limited

pfsense_update_firewall_traffic_shaper_limiter stays usable, but capped: an agent stuck in a loop can't make hundreds of changes a minute. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "pfsense_update_firewall_traffic_shaper_limiter": {
      "limits": [
        {
          "counter": "pfsense_update_firewall_traffic_shaper_limiter_rate",
          "window": "minute",
          "max": 30,
          "scope": "grant"
        }
      ]
    }
  }
}

LIMIT THIS TOOL → Instant setup, no code required.

The button opens the PolicyLayer dashboard: create your workspace, connect Pfsense, apply this rule, and every pfsense_update_firewall_traffic_shaper_limiter call is checked against it from then on.

FAQ

Questions about pfsense_update_firewall_traffic_shaper_limiter

What does the pfsense_update_firewall_traffic_shaper_limiter tool do? +

pfsense_update_firewall_traffic_shaper_limiter is a write tool on the Pfsense MCP server. It is categorised as a Write tool in the Pfsense MCP Server, which means it can create or modify data. Consider rate limits to prevent runaway writes.

How do I enforce a policy on pfsense_update_firewall_traffic_shaper_limiter? +

Register the Pfsense MCP server in PolicyLayer and add a rule for pfsense_update_firewall_traffic_shaper_limiter: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches Pfsense. Nothing to install.

What risk level is pfsense_update_firewall_traffic_shaper_limiter? +

pfsense_update_firewall_traffic_shaper_limiter is a Write tool with medium risk. Write tools should be rate-limited to prevent accidental bulk modifications.

Can I rate-limit pfsense_update_firewall_traffic_shaper_limiter? +

Yes. Add a rate_limit block to the pfsense_update_firewall_traffic_shaper_limiter rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block pfsense_update_firewall_traffic_shaper_limiter completely? +

Set action: deny in the PolicyLayer policy for pfsense_update_firewall_traffic_shaper_limiter. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides pfsense_update_firewall_traffic_shaper_limiter? +

pfsense_update_firewall_traffic_shaper_limiter is provided by the Pfsense MCP server (abl030/pfsense-mcp). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.

KEEP EXPLORING

More on Pfsense, and thousands of servers like it.

This server

All 680 Pfsense tools →

Across the catalogue

aroflo_create_or_update_record on AroFlo MCP →team_manager_update_budget on Team Manager MCP → The MCP Attack Database →

Guides

Govern customer-ops agents →Argument validation →Scoped token →