VENTURILIQ

SERVEREngScript Engineering MCP SOURCEhttps://engscript.com/mcp

Medium RISK CLASS

Category Write

Parameters 77 required

Recommended Rate-limitedsee the rule below

Registry record Grade F, identity unverified Pull the record →

This record as markdown: /tools/com-engscript-mcp/venturiliq.md

WHAT IT DOES

What VENTURILIQ does on EngScript Engineering MCP

AI agents use VENTURILIQ to create or update resources in EngScript Engineering MCP, usually the action step of a workflow, after the agent has gathered context. Every call changes real data in your EngScript Engineering MCP environment.

Parameter	Type	Required	Description
`M`	object	Yes	Liquid mass flow rate. Set value='?' to calculate.
`D1`	object	Yes	Pipe inside diameter
`D2`	object	Yes	Venturi throat diameter. Set value='?' to calculate.
`P1`	object	Yes	Upstream (operating) pressure
`dP`	object	Yes	Differential pressure across Venturi meter. Set value='?' to calculate.
`mu`	object	Yes	Dynamic viscosity
`rho`	object	Yes	Fluid density

Parameters from the server's own tool schema.

RISK

Why VENTURILIQ is rated Medium

An AI agent can call VENTURILIQ faster than any human can review: one bad instruction and it creates or modifies resources in EngScript Engineering MCP by the hundred, each call as confident as the last.

Risk signalsHigh parameter count (21 properties)

Attacks that exploit this kind of access

RECOMMENDED RULE

The rule that runs VENTURILIQ safely

PolicyLayer is an MCP gateway: it sits between your AI agents and EngScript Engineering MCP, and checks every tool call against a rule you set before the call runs. Nothing changes on the server itself. For VENTURILIQ, this is the rule to start with:

VENTURILIQ Rate-limited

VENTURILIQ stays usable, but capped: an agent stuck in a loop can't make hundreds of changes a minute. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "VENTURILIQ": {
      "limits": [
        {
          "counter": "venturiliq_rate",
          "window": "minute",
          "max": 30,
          "scope": "grant"
        }
      ]
    }
  }
}

LIMIT THIS TOOL → Instant setup, no code required.

The button opens the PolicyLayer dashboard: create your workspace, connect EngScript Engineering MCP, apply this rule, and every VENTURILIQ call is checked against it from then on.

FAQ

Questions about VENTURILIQ

What does the VENTURILIQ tool do? +

Liquid Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated. It is categorised as a Write tool in the EngScript Engineering MCP MCP Server, which means it can create or modify data. Consider rate limits to prevent runaway writes.

What parameters does VENTURILIQ accept? +

VENTURILIQ accepts 7 parameters: M, D1, D2, P1, dP, mu, rho. Required: M, D1, D2, P1, dP, mu, rho. The full parameter table on this page comes from the server's own tool schema.

How do I enforce a policy on VENTURILIQ? +

Register the EngScript Engineering MCP server in PolicyLayer and add a rule for VENTURILIQ: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches EngScript Engineering MCP. Nothing to install.

What risk level is VENTURILIQ? +

VENTURILIQ is a Write tool with medium risk. Write tools should be rate-limited to prevent accidental bulk modifications.

Can I rate-limit VENTURILIQ? +

Yes. Add a rate_limit block to the VENTURILIQ rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block VENTURILIQ completely? +

Set action: deny in the PolicyLayer policy for VENTURILIQ. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides VENTURILIQ? +

VENTURILIQ is provided by the EngScript Engineering MCP server (https://engscript.com/mcp). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.

KEEP EXPLORING

More on EngScript Engineering, and thousands of servers like it.

This server

All 58 EngScript Engineering tools →

Across the catalogue

The MCP Attack Database →

Guides

Govern customer-ops agents →Argument validation →Scoped token →