geomech_hydraulic_fracture_width

A execute tool on the pyResToolbox MCP server.

SERVERpyResToolbox MCP Server SOURCEgabrielserrao/pyrestoolbox-mcp

High RISK CLASS

Category Execute

Parameters 00 required

Recommended Rate-limitedsee the rule below

Registry record Grade F, identity unverified Pull the record →

This record as markdown: /tools/gabrielserrao-pyrestoolbox-mcp/geomech-hydraulic-fracture-width.md

WHAT IT DOES

What geomech_hydraulic_fracture_width does on pyResToolbox MCP Server

AI agents invoke geomech_hydraulic_fracture_width to trigger actions in pyResToolbox MCP Server. What it does depends on the arguments the agent supplies, and its effects often reach beyond the immediate call: builds kicked off, notifications sent, workflows started.

RISK

Why geomech_hydraulic_fracture_width is rated High

The tool name suggests it calculates hydraulic fracture width, a petroleum engineering geomechanics computation. Given the server context (PVT analysis, well performance modeling, reservoir simulation), this is most likely a calculation/simulation tool (Execute). However, the empty description significantly lowers confidence. It is unlikely to be Destructive or Financial.

From the tool's definition Tool name: geomech_hydraulic_fracture_width; description is empty.

Attacks that exploit this kind of access

RECOMMENDED RULE

The rule that runs geomech_hydraulic_fracture_width safely

PolicyLayer is an MCP gateway: it sits between your AI agents and pyResToolbox MCP Server, and checks every tool call against a rule you set before the call runs. Nothing changes on the server itself. For geomech_hydraulic_fracture_width, this is the rule to start with:

geomech_hydraulic_fracture_width Rate-limited

geomech_hydraulic_fracture_width stays usable, but rate-capped: a runaway agent can't fire it dozens of times a minute. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "geomech_hydraulic_fracture_width": {
      "limits": [
        {
          "counter": "geomech_hydraulic_fracture_width_rate",
          "window": "minute",
          "max": 10,
          "scope": "grant"
        }
      ]
    }
  }
}

RATE-LIMIT THIS TOOL → Instant setup, no code required.

The button opens the PolicyLayer dashboard: create your workspace, connect pyResToolbox MCP Server, apply this rule, and every geomech_hydraulic_fracture_width call is checked against it from then on.

FAQ

Questions about geomech_hydraulic_fracture_width

What does the geomech_hydraulic_fracture_width tool do? +

geomech_hydraulic_fracture_width is a execute tool on the pyResToolbox MCP Server MCP server. It is categorised as a Execute tool in the pyResToolbox MCP Server MCP Server, which means it can trigger actions or run processes. Use rate limits and argument validation.

How do I enforce a policy on geomech_hydraulic_fracture_width? +

Register the pyResToolbox MCP Server MCP server in PolicyLayer and add a rule for geomech_hydraulic_fracture_width: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches pyResToolbox MCP Server. Nothing to install.

What risk level is geomech_hydraulic_fracture_width? +

geomech_hydraulic_fracture_width is a Execute tool with high risk. Execute tools should be rate-limited and have argument validation enabled.

Can I rate-limit geomech_hydraulic_fracture_width? +

Yes. Add a rate_limit block to the geomech_hydraulic_fracture_width rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block geomech_hydraulic_fracture_width completely? +

Set action: deny in the PolicyLayer policy for geomech_hydraulic_fracture_width. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides geomech_hydraulic_fracture_width? +

geomech_hydraulic_fracture_width is provided by the pyResToolbox MCP Server MCP server (gabrielserrao/pyrestoolbox-mcp). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.

KEEP EXPLORING

More on pyResToolbox MCP Server, and thousands of servers like it.

This server

All 108 pyResToolbox MCP Server tools → High-risk tools on this server →

Across the catalogue

All high-risk MCP tools → The MCP Attack Database →

Guides

Govern code and CI agents →Agent sandbox →Least privilege for MCP →