edgeconnect_set_address_group

Create/update or replace an EdgeConnect ACL address group with write guards.

SERVERHpe Networking SOURCEsecure-ssid/hpe-networking-mcp

Medium RISK CLASS

Category Write

Parameters 00 required

Recommended Rate-limitedsee the rule below

Registry record Grade F, identity unverified Pull the record →

This record as markdown: /tools/hpe-networking-mcp/edgeconnect-set-address-group.md

WHAT IT DOES

What edgeconnect_set_address_group does on Hpe Networking

AI agents use edgeconnect_set_address_group to create or update resources in Hpe Networking, usually the action step of a workflow, after the agent has gathered context. Every call changes real data in your Hpe Networking environment.

RISK

Why edgeconnect_set_address_group is rated Medium

This tool creates, updates, or replaces ACL address groups, which are configurations that control network traffic filtering and access control policies. While not destructive (the operation is reversible via subsequent updates/replacements), it modifies critical network security infrastructure.

From the tool's definition Tool description states 'Create/update or replace an EdgeConnect ACL address group' — the verbs 'create', 'update', and 'replace' are write operations that modify network ACL configurations.

Attacks that exploit this kind of access

RECOMMENDED RULE

The rule that runs edgeconnect_set_address_group safely

PolicyLayer is an MCP gateway: it sits between your AI agents and Hpe Networking, and checks every tool call against a rule you set before the call runs. Nothing changes on the server itself. For edgeconnect_set_address_group, this is the rule to start with:

edgeconnect_set_address_group Rate-limited

edgeconnect_set_address_group stays usable, but capped: an agent stuck in a loop can't make hundreds of changes a minute. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "edgeconnect_set_address_group": {
      "limits": [
        {
          "counter": "edgeconnect_set_address_group_rate",
          "window": "minute",
          "max": 30,
          "scope": "grant"
        }
      ]
    }
  }
}

LIMIT THIS TOOL → Instant setup, no code required.

The button opens the PolicyLayer dashboard: create your workspace, connect Hpe Networking, apply this rule, and every edgeconnect_set_address_group call is checked against it from then on.

FAQ

Questions about edgeconnect_set_address_group

What does the edgeconnect_set_address_group tool do? +

Create/update or replace an EdgeConnect ACL address group with write guards. It is categorised as a Write tool in the Hpe Networking MCP Server, which means it can create or modify data. Consider rate limits to prevent runaway writes.

How do I enforce a policy on edgeconnect_set_address_group? +

Register the Hpe Networking MCP server in PolicyLayer and add a rule for edgeconnect_set_address_group: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches Hpe Networking. Nothing to install.

What risk level is edgeconnect_set_address_group? +

edgeconnect_set_address_group is a Write tool with medium risk. Write tools should be rate-limited to prevent accidental bulk modifications.

Can I rate-limit edgeconnect_set_address_group? +

Yes. Add a rate_limit block to the edgeconnect_set_address_group rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block edgeconnect_set_address_group completely? +

Set action: deny in the PolicyLayer policy for edgeconnect_set_address_group. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides edgeconnect_set_address_group? +

edgeconnect_set_address_group is provided by the Hpe Networking MCP server (secure-ssid/hpe-networking-mcp). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.

KEEP EXPLORING

More on Hpe Networking, and thousands of servers like it.

This server

All 595 Hpe Networking tools →

Across the catalogue

emit_assumption_set on 0sec →set-prioity on Kanban MCP Server →team_manager_set_sources on Team Manager MCP → The MCP Attack Database →

Guides

Govern customer-ops agents →Argument validation →Scoped token →