create_pose_controlnet_driver

SERVERtdmcp — TouchDesigner MCP server SOURCE@dpantani/tdmcp

Medium RISK CLASS

Category Write

Parameters 00 required

Recommended Rate-limitedsee the rule below

Registry record Grade F, identity unverified Pull the record →

This record as markdown: /tools/io-github-pantani-tdmcp/create-pose-controlnet-driver.md

WHAT IT DOES

What create_pose_controlnet_driver does on tdmcp — TouchDesigner MCP server

AI agents use create_pose_controlnet_driver to create or update resources in tdmcp — TouchDesigner MCP server, usually the action step of a workflow, after the agent has gathered context. Every call changes real data in your tdmcp — TouchDesigner MCP server environment.

RISK

Why create_pose_controlnet_driver is rated Medium

This tool creates new nodes/operators in TouchDesigner (a GLSL TOP, CHOP-to-TOP conversion, optional sender wiring) and produces a rendered output image. It is primarily a Write/create operation — it builds and wires components in the TD network. It does not delete anything, execute arbitrary code, or involve financial transactions.

From the tool's definition 'Render a canonical OpenPose-colored stick figure TOP... from an existing pose CHOP', 'Optionally auto-wires the output to a Syphon/Spout or NDI sender', 'this tool produces the driver conditioning image that ControlNet consumes'

Attacks that exploit this kind of access

RECOMMENDED RULE

The rule that runs create_pose_controlnet_driver safely

PolicyLayer is an MCP gateway: it sits between your AI agents and tdmcp — TouchDesigner MCP server, and checks every tool call against a rule you set before the call runs. Nothing changes on the server itself. For create_pose_controlnet_driver, this is the rule to start with:

create_pose_controlnet_driver Rate-limited

create_pose_controlnet_driver stays usable, but capped: an agent stuck in a loop can't make hundreds of changes a minute. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "create_pose_controlnet_driver": {
      "limits": [
        {
          "counter": "create_pose_controlnet_driver_rate",
          "window": "minute",
          "max": 30,
          "scope": "grant"
        }
      ]
    }
  }
}

LIMIT THIS TOOL → Instant setup, no code required.

The button opens the PolicyLayer dashboard: create your workspace, connect tdmcp — TouchDesigner MCP server, apply this rule, and every create_pose_controlnet_driver call is checked against it from then on.

FAQ

Questions about create_pose_controlnet_driver

What does the create_pose_controlnet_driver tool do? +

Render a canonical OpenPose-colored stick figure TOP (per-limb RGB lines + per-joint colored discs on a black background, default 512×512) from an existing pose CHOP produced by create_pose_tracking. The render is GPU-rasterized in a single GLSL TOP that samples the pose CHOP via a CHOP-to-TOP. Optionally auto-wires the output to a Syphon/Spout or NDI sender for a downstream Stable Diffusion / ComfyUI / StreamDiffusion ControlNet node. No model inference — this tool produces the driver conditioning image that ControlNet consumes. It is categorised as a Write tool in the tdmcp — TouchDesigner MCP server MCP Server, which means it can create or modify data. Consider rate limits to prevent runaway writes.

How do I enforce a policy on create_pose_controlnet_driver? +

Register the tdmcp — TouchDesigner MCP server MCP server in PolicyLayer and add a rule for create_pose_controlnet_driver: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches tdmcp — TouchDesigner MCP server. Nothing to install.

What risk level is create_pose_controlnet_driver? +

create_pose_controlnet_driver is a Write tool with medium risk. Write tools should be rate-limited to prevent accidental bulk modifications.

Can I rate-limit create_pose_controlnet_driver? +

Yes. Add a rate_limit block to the create_pose_controlnet_driver rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block create_pose_controlnet_driver completely? +

Set action: deny in the PolicyLayer policy for create_pose_controlnet_driver. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides create_pose_controlnet_driver? +

create_pose_controlnet_driver is provided by the tdmcp — TouchDesigner MCP server MCP server (@dpantani/tdmcp). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.

KEEP EXPLORING

More on tdmcp — TouchDesigner MCP server, and thousands of servers like it.

This server

All 334 tdmcp — TouchDesigner MCP server tools →

Across the catalogue

create_task on 0rca Dojo MCP Server →create-task on Kanban MCP Server →create_package_backup on Android Forensics ADB MCP Server →create_project on Stitch MCP Server → The MCP Attack Database →

Guides

Govern customer-ops agents →Argument validation →Scoped token →