get_renewable_energy

SERVERMcp Server SOURCEhttps://dchub.cloud/mcp

Low RISK CLASS

Category Read

Parameters 70 required

Recommended Allowedsee the rule below

Registry record Grade F, identity unverified Pull the record →

This record as markdown: /tools/cloud-dchub-mcp-server/get-renewable-energy.md

WHAT IT DOES

What get_renewable_energy does on Mcp Server

AI agents call get_renewable_energy to retrieve information from Mcp Server without modifying anything. It is typically the context-gathering step in research, monitoring, and reporting workflows, before the agent takes action elsewhere.

Parameter	Type	Required	Description
`lat`	number	—	Optional latitude in decimal degrees (-90 to 90) to find nearest projects within 50mi
`lng`	number	—	Alias for lon — either name works
`lon`	number	—	Optional longitude in decimal degrees (-180 to 180) to find nearest projects within 50mi
`state`	string	—	US state abbreviation, e.g. TX, VA, AZ
`latitude`	number	—	Alias for lat — either name works
`longitude`	number	—	Alias for lon — either name works
`energy_type`	string	—	Renewable type: "solar", "wind", or "combined"; omit for all

Parameters from the server's own tool schema.

RISK

Why get_renewable_energy is rated Low

Even though get_renewable_energy only reads data, uncontrolled read access leaks sensitive information and racks up API costs: an agent caught in a retry loop can make thousands of calls a minute without anyone noticing.

Attacks that exploit this kind of access

RECOMMENDED RULE

The rule that runs get_renewable_energy safely

PolicyLayer is an MCP gateway: it sits between your AI agents and Mcp Server, and checks every tool call against a rule you set before the call runs. Nothing changes on the server itself. For get_renewable_energy, this is the rule to start with:

get_renewable_energy Allowed

get_renewable_energy is read-only, so it stays allowed. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "get_renewable_energy": {}
  }
}

ALLOW ONLY THIS TOOL → Instant setup, no code required.

The button opens the PolicyLayer dashboard: create your workspace, connect Mcp Server, apply this rule, and every get_renewable_energy call is checked against it from then on.

FAQ

Questions about get_renewable_energy

What does the get_renewable_energy tool do? +

Use when siting a renewable-powered data center, sizing a PPA, or assessing RE100/24-7-CFE feasibility for one US state. Example: "What is Texas wind+solar capacity and how much utility-scale solar is operating today?" — get_renewable_energy energy_type=solar state=TX. Params: energy_type one of "solar" | "wind" | "combined" (omit for all); state 2-letter US code (e.g. TX, VA, AZ); lat+lon (optional) for the nearest projects within 50mi. Returns: {capacity_mw_total, by_fuel: {solar_utility, solar_rooftop, wind_onshore, wind_offshore}, capacity_factor_pct, top_projects[{name, mw, operator, cod}], state_rps_target_pct, source: "EIA-860 + state RPS"}. Do NOT use for live grid generation (use get_grid_data) or non-US (use get_grid_scoreboard for EU/UK/AU/TW). It is categorised as a Read tool in the Mcp Server MCP Server, which means it retrieves data without modifying state.

What parameters does get_renewable_energy accept? +

get_renewable_energy accepts 7 parameters: lat, lng, lon, state, latitude, longitude, energy_type. The full parameter table on this page comes from the server's own tool schema.

How do I enforce a policy on get_renewable_energy? +

Register the Mcp Server MCP server in PolicyLayer and add a rule for get_renewable_energy: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches Mcp Server. Nothing to install.

What risk level is get_renewable_energy? +

get_renewable_energy is a Read tool with low risk. Read-only tools are generally safe to allow by default.

Can I rate-limit get_renewable_energy? +

Yes. Add a rate_limit block to the get_renewable_energy rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block get_renewable_energy completely? +

Set action: deny in the PolicyLayer policy for get_renewable_energy. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides get_renewable_energy? +

get_renewable_energy is provided by the Mcp Server MCP server (https://dchub.cloud/mcp). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.

KEEP EXPLORING

More on Mcp Server, and thousands of servers like it.

This server

All 79 Mcp Server tools →

Across the catalogue

get_cocktail_by_category on Cocktails RAG MCP Server →get_torrent_detail on M-Team MCP Server →aiva_get_affiliate on AIVA MCP Server →get-chuck-categories on Jokes MCP Server → The MCP Attack Database →

Guides

Roll out MCP under one policy →Data exfiltration →MCP token cost →