cao_documents

SERVERImmobilier SOURCEhttps://synergieloc.fr/mcp

Medium RISK CLASS

Category Write

Parameters 120 required

Recommended Rate-limitedsee the rule below

Registry record Grade F, identity unverified Pull the record →

This record as markdown: /tools/fr-synergieloc-immobilier/cao-documents.md

WHAT IT DOES

What cao_documents does on Immobilier

AI agents use cao_documents to create or update resources in Immobilier, usually the action step of a workflow, after the agent has gathered context. Every call changes real data in your Immobilier environment.

Parameter	Type	Required	Description
`murs`	array	—	Walls: plan segments extruded vertically. Every coordinate in this whole scene is in MILLIMETRES, in a single plan frame whose origin you choose — X to the righ
`plan`	array	—	2D reference lines — drawn flat, never extruded and never counted in the quantities. Use them for axes, plot limits or setting-out marks.
`boites`	array	—	Boxes (furniture, volumes): a rectangular block placed by its CENTRE, not by a corner. Millimetres, same frame as murs[].
`georef`	object	—	Optional Lambert-93 (EPSG:2154) false origin for IfcMapConversion. Local millimetres are scaled by 0.001 to CRS metres. Do not invent coordinates: omit est/nord
`cercles`	array	—	Circles on the 2D plan, alongside plan[] lines: each has a centre and a radius, in the same unit as the plan. Use for round shapes a polyline would render badly
`reseaux`	array	—	Plumbing pipe runs (EF/EC/EU/EV/EP/chauffage) — used only by cao_pdf (technical plan + linear-meter quantities per type).
`toitures`	array	—	Roofs — used only by cao_pdf. WITHOUT this field: a flat roof is auto-generated over the footprint of ALL walls (legacy default). WITH it: compose freely — each
`appliquer`	boolean	—	Apply the proposed fixes to a copy of the scene.
`plomberie`	array	—	Sanitary fixtures (sink, WC, shower…) — used only by cao_pdf. Same positioning as electricite.
`revalider`	boolean	—	With appliquer: re-run the check on the corrected scene.
`decoration`	array	—	Paint/finish per wall — used only by cao_pdf. Colors the elevations (exterior face) and the axonometric view (face auto-detected by orientation relative to the
`ouvertures`	array	—	Doors/windows embedded in a wall — used only by cao_pdf (elevations + axonometric view), no effect on dxf/metres.

Parameters from the server's own tool schema.

RISK

Why cao_documents is rated Medium

An AI agent can call cao_documents faster than any human can review: one bad instruction and it creates or modifies resources in Immobilier by the hundred, each call as confident as the last.

Risk signalsHigh parameter count (96 properties) · Bulk/mass operation — affects multiple targets

Attacks that exploit this kind of access

RECOMMENDED RULE

The rule that runs cao_documents safely

PolicyLayer is an MCP gateway: it sits between your AI agents and Immobilier, and checks every tool call against a rule you set before the call runs. Nothing changes on the server itself. For cao_documents, this is the rule to start with:

cao_documents Rate-limited

cao_documents stays usable, but capped: an agent stuck in a loop can't make hundreds of changes a minute. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "cao_documents": {
      "limits": [
        {
          "counter": "cao_documents_rate",
          "window": "minute",
          "max": 30,
          "scope": "grant"
        }
      ]
    }
  }
}

LIMIT THIS TOOL → Instant setup, no code required.

The button opens the PolicyLayer dashboard: create your workspace, connect Immobilier, apply this rule, and every cao_documents call is checked against it from then on.

FAQ

Questions about cao_documents

What does the cao_documents tool do? +

WHEN you need the drawing-set completeness check alone: one plan per level, every upper floor reached by a staircase that actually arrives there (or a lift), stairwells protected by guardrails (NF P01-012). Returns alerts, applicable correctifs and the coverage per level. Free, no key. cao_verifier already includes it. It is categorised as a Write tool in the Immobilier MCP Server, which means it can create or modify data. Consider rate limits to prevent runaway writes.

What parameters does cao_documents accept? +

cao_documents accepts 12 parameters: murs, plan, boites, georef, cercles, reseaux, toitures, appliquer, plomberie, revalider, decoration, ouvertures. The full parameter table on this page comes from the server's own tool schema.

How do I enforce a policy on cao_documents? +

Register the Immobilier MCP server in PolicyLayer and add a rule for cao_documents: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches Immobilier. Nothing to install.

What risk level is cao_documents? +

cao_documents is a Write tool with medium risk. Write tools should be rate-limited to prevent accidental bulk modifications.

Can I rate-limit cao_documents? +

Yes. Add a rate_limit block to the cao_documents rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block cao_documents completely? +

Set action: deny in the PolicyLayer policy for cao_documents. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides cao_documents? +

cao_documents is provided by the Immobilier MCP server (https://synergieloc.fr/mcp). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.

KEEP EXPLORING

More on Immobilier, and thousands of servers like it.

This server

All 70 Immobilier tools →

Across the catalogue

The MCP Attack Database →

Guides

Govern customer-ops agents →Argument validation →Scoped token →