adb_gps_firmware
GNSS/GPS chipset and firmware identification. Reports GNSS hardware model (manufacturer, chip, firmware version), supported constellations (GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC, SBAS), signal types with frequencies, dual-frequency (L1+L5) support, raw measurement capabilities (pseudorange a...
This record as markdown: /tools/io-github-fullread-deepadb/adb-gps-firmware.md
What adb_gps_firmware does on Deepadb
AI agents call adb_gps_firmware to retrieve information from Deepadb without modifying anything. It is typically the context-gathering step in research, monitoring, and reporting workflows, before the agent takes action elsewhere.
Why adb_gps_firmware is rated Low
The tool queries and returns GPS/GNSS system information without modifying device state. While the data revealed (A-GPS modes, SUPL config, raw measurements) could inform reconnaissance for IMSI catcher or spoofing research, the tool itself performs passive information gathering.
From the tool's definition Tool 'adb_gps_firmware' reports/identifies GNSS hardware, firmware version, constellations, signal types, and configurations.
Attacks that exploit this kind of access
The rule that runs adb_gps_firmware safely
PolicyLayer is an MCP gateway: it sits between your AI agents and Deepadb, and checks every tool call against a rule you set before the call runs. Nothing changes on the server itself. For adb_gps_firmware, this is the rule to start with:
adb_gps_firmware is read-only, so it stays allowed. Everything else on the server is denied unless you say otherwise.
The button opens the PolicyLayer dashboard: create your workspace, connect Deepadb, apply this rule, and every adb_gps_firmware call is checked against it from then on.
Questions about adb_gps_firmware
GNSS/GPS chipset and firmware identification. Reports GNSS hardware model (manufacturer, chip, firmware version), supported constellations (GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC, SBAS), signal types with frequencies, dual-frequency (L1+L5) support, raw measurement capabilities (pseudorange access for spoofing detection), A-GPS modes (MSB/MSA — cellular-routed assisted GPS relevant to IMSI catcher research), carrier phase measurements, navigation message decoding, and SUPL server configuration. It is categorised as a Read tool in the Deepadb MCP Server, which means it retrieves data without modifying state.
Register the Deepadb MCP server in PolicyLayer and add a rule for adb_gps_firmware: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches Deepadb. Nothing to install.
adb_gps_firmware is a Read tool with low risk. Read-only tools are generally safe to allow by default.
Yes. Add a rate_limit block to the adb_gps_firmware rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.
Set action: deny in the PolicyLayer policy for adb_gps_firmware. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.
adb_gps_firmware is provided by the Deepadb MCP server (deepadb). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.
More on Deepadb, and thousands of servers like it.
This server
Across the catalogue