run_reslice_and_print · Kiln MCP: Risk & Policy

WHAT IT DOES

What run_reslice_and_print does on Kiln

AI agents invoke run_reslice_and_print to trigger actions in Kiln. What it does depends on the arguments the agent supplies, and its effects often reach beyond the immediate call — builds kicked off, notifications sent, workflows started.

WHY IT NEEDS A POLICY

Why run_reslice_and_print needs a policy

This is Execute rather than Destructive because reslicing and printing are reversible operations (prints can be stopped or reprints rejected); however, it is high-severity because a malicious AI agent could initiate unwanted physical fabrication, waste materials, damage hardware through invalid designs, or consume energy and consumables.

From the tool's definition Tool name 'run_reslice_and_print' indicates it triggers a reslicing operation (converting CAD/mesh to printer instructions) and initiates a print job on physical hardware.

Attacks that exploit this kind of access

Recommended rule Ready

Verdict

run_reslice_and_print Rate-limited

run_reslice_and_print stays usable, but rate-capped — a runaway agent can't fire it dozens of times a minute. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "run_reslice_and_print": {
      "limits": [
        {
          "counter": "run_reslice_and_print_rate",
          "window": "minute",
          "max": 10,
          "scope": "grant"
        }
      ]
    }
  }
}

RATE-LIMIT THIS TOOL →

Instant setup, no code required.

PolicyLayer is an MCP gateway: every tool call is checked against your rule before it reaches Kiln, so you can run agents against it safely.

FAQ

Questions about run_reslice_and_print

What does the run_reslice_and_print tool do? +

run_reslice_and_print. It is categorised as a Execute tool in the Kiln MCP Server, which means it can trigger actions or run processes. Use rate limits and argument validation.

How do I enforce a policy on run_reslice_and_print? +

Register the Kiln MCP server in PolicyLayer and add a rule for run_reslice_and_print: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches Kiln. Nothing to install.

What risk level is run_reslice_and_print? +

run_reslice_and_print is a Execute tool with high risk. Execute tools should be rate-limited and have argument validation enabled.

Can I rate-limit run_reslice_and_print? +

Yes. Add a rate_limit block to the run_reslice_and_print rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block run_reslice_and_print completely? +

Set action: deny in the PolicyLayer policy for run_reslice_and_print. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides run_reslice_and_print? +

run_reslice_and_print is provided by the Kiln MCP server (codeofaxel/Kiln). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.