// MCP TOOL REFERENCE

AETHERLINK SDR MCP TOOLS

26 tools from the AetherLink SDR MCP MCP Server, categorised by risk level.

// ALL 26 AETHERLINK SDR MCP TOOLS

READ 7 tools

Read aviation_get_aircraft Get list of currently tracked aircraft Read ism_get_devices Get list of detected ISM band devices (weather stations, sensors, etc.) Read marine_get_vessels Get list of tracked vessels Read pager_get_messages Get decoded pager messages Read sdr_get_status Get current SDR status and configuration Read spectrum_analyze Perform advanced spectrum analysis at current frequency Read spectrum_scan Scan a frequency range for signals

WRITE 7 tools

Write audio_record_start Start recording demodulated audio (FM/AM) to WAV file Write audio_record_stop Stop current audio recording Write aviation_stop_tracking Stop tracking aircraft Write sdr_connect Connect to SDR hardware (RTL-SDR or HackRF) Write sdr_disconnect Disconnect from SDR hardware Write sdr_set_frequency Set SDR center frequency in Hz Write sdr_set_gain Set SDR gain in dB or

EXECUTE 12 tools

Execute aviation_track_aircraft Start tracking aircraft via ADS-B on 1090 MHz using dump1090 Execute ism_start_scanning Start scanning ISM bands for devices (433MHz, 315MHz, 868MHz, 915MHz) using rtl_433 Execute ism_stop_scanning Stop ISM band scanning Execute marine_stop_tracking Stop tracking ships Execute marine_track_vessels Start tracking ships via AIS on 161.975 MHz or 162.025 MHz Execute pager_start_decoding Start decoding POCSAG pager messages on current frequency Execute pager_stop_decoding Stop decoding POCSAG pager messages Execute recording_start Start recording IQ samples to file Execute recording_stop Stop current recording Execute satellite_decode_meteor Decode Meteor-M weather satellite LRPT transmission using SatDump Execute signal_generator Generate and transmit a signal (HackRF only) Execute hackrf_set_tx_gain Set HackRF transmit gain (0-47 dB)

// FAQ

How many tools does the AetherLink SDR MCP MCP server have? +

The AetherLink SDR MCP MCP server exposes 26 tools across 3 categories: Read, Write, Execute.

How do I enforce policies on AetherLink SDR MCP tools? +

Route the AetherLink SDR MCP server through the PolicyLayer gateway. Define allow, deny, or approval rules per tool in the dashboard; they are enforced on every call before it reaches the server.

What risk categories do AetherLink SDR MCP tools fall into? +

AetherLink SDR MCP tools are categorised as Read (7), Write (7), Execute (12). Each category has a recommended default policy.

Enforce policy on every AetherLink SDR MCP tool call.

Start from AetherLink SDR MCP, add the rest of your stack, and see everything your agents can call. Then put policy on all of it.

CHECK YOUR STACK →

Free to start. No card required.

43,000+ MCP servers and 220,000+ tools scanned and risk-classified.