control_gimbal · OBSBOT Camera MCP Server MCP: Risk & Policy

WHAT IT DOES

What control_gimbal does on OBSBOT Camera MCP Server

AI agents invoke control_gimbal to trigger actions in OBSBOT Camera MCP Server. What it does depends on the arguments the agent supplies, and its effects often reach beyond the immediate call — builds kicked off, notifications sent, workflows started.

WHY IT NEEDS A POLICY

Why control_gimbal needs a policy

This tool executes a physical action on external hardware (camera gimbal), causing real-world movement. It is not a simple read/write of data but rather an operation that drives motors/servos. Effects depend on arguments (pan/tilt values). No financial or irreversible destructive outcome, but misuse could cause unintended camera repositioning or physical interference.

From the tool's definition 'Control camera gimbal' with pan/tilt directional parameters — triggers physical hardware movement on an external PTZ camera device

Attacks that exploit this kind of access

Recommended rule Ready

Verdict

control_gimbal Rate-limited

control_gimbal stays usable, but rate-capped — a runaway agent can't fire it dozens of times a minute. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "control_gimbal": {
      "limits": [
        {
          "counter": "control_gimbal_rate",
          "window": "minute",
          "max": 10,
          "scope": "grant"
        }
      ]
    }
  }
}

RATE-LIMIT THIS TOOL →

Instant setup, no code required.

PolicyLayer is an MCP gateway: every tool call is checked against your rule before it reaches OBSBOT Camera MCP Server, so you can run agents against it safely.

FAQ

Questions about control_gimbal

What does the control_gimbal tool do? +

Control camera gimbal. Pan: NEGATIVE=RIGHT, POSITIVE=LEFT. Tilt: POSITIVE=UP, NEGATIVE=DOWN. It is categorised as a Execute tool in the OBSBOT Camera MCP Server MCP Server, which means it can trigger actions or run processes. Use rate limits and argument validation.

How do I enforce a policy on control_gimbal? +

Register the OBSBOT Camera MCP Server MCP server in PolicyLayer and add a rule for control_gimbal: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches OBSBOT Camera MCP Server. Nothing to install.

What risk level is control_gimbal? +

control_gimbal is a Execute tool with high risk. Execute tools should be rate-limited and have argument validation enabled.

Can I rate-limit control_gimbal? +

Yes. Add a rate_limit block to the control_gimbal rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block control_gimbal completely? +

Set action: deny in the PolicyLayer policy for control_gimbal. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides control_gimbal? +

control_gimbal is provided by the OBSBOT Camera MCP Server MCP server (radar105/obsbot-camera-mcp). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.