serial_connect_match · MCP Remote Access MCP: Risk & Policy

WHAT IT DOES

What serial_connect_match does on MCP Remote Access

AI agents use serial_connect_match to create or update resources in MCP Remote Access — usually the action step of a workflow, after the agent has gathered context. Every call changes real data in your MCP Remote Access environment.

WHY IT NEEDS A POLICY

Why serial_connect_match needs a policy

This tool establishes a new serial connection to a device, which is a write/create operation (creating a connection resource). It does not execute commands or destructively modify data, but initiating a connection to embedded/IoT hardware has moderate blast radius if misused (e.g., connecting to the wrong device). Severity is medium given the potential to interact with hardware devices.

From the tool's definition Connect to a serial port by matching VID/PID/serial/description. Returns a connection ID.

Attacks that exploit this kind of access

Recommended rule Ready

Verdict

serial_connect_match Rate-limited

serial_connect_match stays usable, but capped — an agent stuck in a loop can't make hundreds of changes a minute. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "serial_connect_match": {
      "limits": [
        {
          "counter": "serial_connect_match_rate",
          "window": "minute",
          "max": 30,
          "scope": "grant"
        }
      ]
    }
  }
}

LIMIT THIS TOOL →

Instant setup, no code required.

PolicyLayer is an MCP gateway: every tool call is checked against your rule before it reaches MCP Remote Access, so you can run agents against it safely.

FAQ

Questions about serial_connect_match

What does the serial_connect_match tool do? +

Connect to a serial port by matching VID/PID/serial/description. Returns a connection ID. It is categorised as a Write tool in the MCP Remote Access MCP Server, which means it can create or modify data. Consider rate limits to prevent runaway writes.

How do I enforce a policy on serial_connect_match? +

Register the MCP Remote Access MCP server in PolicyLayer and add a rule for serial_connect_match: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches MCP Remote Access. Nothing to install.

What risk level is serial_connect_match? +

serial_connect_match is a Write tool with medium risk. Write tools should be rate-limited to prevent accidental bulk modifications.

Can I rate-limit serial_connect_match? +

Yes. Add a rate_limit block to the serial_connect_match rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block serial_connect_match completely? +

Set action: deny in the PolicyLayer policy for serial_connect_match. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides serial_connect_match? +

serial_connect_match is provided by the MCP Remote Access MCP server (rfingadam/mcp-remote-access). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.