STACK CHECK DOCS PRICING GET STARTED

// SCAN REPORT

MCP Civil Tools

37 tools. 0 can modify or destroy data without limits.

Read-only server. Low risk, but rate limits prevent runaway API costs.

Last updated: 29 Jun 2026

0 can modify or destroy data

37 read-only

37 tools total

Community server · catalogue entry verified 29/06/2026

How to control MCP Civil Tools ↓

TOOL MAP

What MCP Civil Tools exposes to your agents

Read (37) Write / Execute (0) Destructive / Financial (0)

Running more than one server? Check your whole stack →

THE RISK

What can go wrong

✕

Even read-only tools carry cost. An agent in a retry loop can make thousands of API calls per minute, exhausting rate limits and running up bills.

POLICY

How to control MCP Civil Tools

PolicyLayer is an MCP gateway — it sits between your AI agents and MCP Civil Tools, and nothing reaches the server without passing your rules. These are the rules we recommend:

Cap read operations

{
  "calc_active_earth_pressure": {
    "limits": [
      {
        "counter": "calc_active_earth_pressure_per_minute",
        "window": "minute",
        "max": 60,
        "scope": "grant"
      }
    ]
  }
}

Controls API costs and prevents retry loops from exhausting upstream rate limits.

Create a free account and register MCP Civil Tools — nothing to install.
Add these rules — paste them, or build them visually. Tune the limits to your setup.
Point your MCP client (Claude, Cursor, anything) at your gateway URL.

ENFORCE POLICY ON MCP CIVIL TOOLS →

Instant setup, no code required.

FULL CATALOGUE

All 37 MCP Civil Tools tools

READ 37 tools

Read calc_active_earth_pressure 計算主動土壓力係數 Ka（輸入內摩擦角，單位：度）。 Read calc_catchment_runoff 集水區最大逕流量計算（支援土地利用、地區、重現期、歷時查表，及年平均降雨量P自動推估I值）。 Read calc_channel_section_flow calc_channel_section_flow Read calc_passive_earth_pressure 計算被動土壓力係數 Kp（輸入內摩擦角，單位：度）。 Read calc_slope_stability 邊坡穩定安全係數計算。 Read calc_soil_erosion 土壤侵蝕模數/流失量計算（支援地區、土壤、土地利用、措施查表）。 Read calc_u_channel_rebar U型溝鋼筋量計算 Read calculate_rebar_weight 計算鋼筋重量 Read check_gabion_stability check_gabion_stability Read check_retaining_wall check_retaining_wall Read design_infiltration_facility 滲水設施設計（支援多型式、土壤查表、流量自動計算與尺寸建議）。 Read get_manning_n 查詢水土保持技術規範常見材料的曼寧係數與最大容許流速。 Read get_rebar_specs 查詢鋼筋規格資料 Read latlon_to_utm 將經緯度轉換為 UTM 座標，只回傳 X,Y 字串（小數點下4位）。 Read list_rebar_numbers 列出所有可用的鋼筋編號及其規格資料 Read list_supported_idf_locations 查詢所有支援的IDF曲線地點清單。 Read list_supported_land_uses 查詢所有支援的土地利用型態清單（C 因子/逕流係數等）。 Read list_supported_manning_materials 查詢目前支援的所有水溝鋪面/渠道材料的曼寧係數種類清單。 Read list_supported_materials 查詢所有支援的常用材料設計參數材料名稱清單。 Read list_supported_max_velocity_materials 查詢所有支援的最大容許流速材料名稱清單。 Read list_supported_practices 查詢所有支援的水保措施清單（P 因子）。 Read list_supported_regions 查詢所有支援的地區名稱清單（R 因子/降雨/IDF/年雨量等）。 Read list_supported_runoff_land_uses 查詢所有支援的土地利用型態清單（逕流係數）。 Read list_supported_slope_protection_methods 查詢所有支援的坡面保護工法建議清單。 Read list_supported_soil_k_types 查詢所有支援的土壤滲透係數土壤類型清單。 Read list_supported_soil_types 查詢所有支援的土壤類型清單（K 因子/土壤參數/滲透係數等）。 Read query_c_factor_tool 查詢覆蓋與管理因子 C 值（依據水土保持技術規範第35條）。 Read query_idf_curve 降雨強度-歷時-頻率（IDF）曲線查詢（支援地區/重現期/歷時查表與推估）。 Read query_k_factor_tool 查詢土壤沖蝕指數 K 值（依據水土保持技術規範第35條）。 Read query_material_parameter 查詢常用材料的設計參數（如單位重、凝聚力、摩擦角、強度等）。 Read query_p_factor_tool 查詢水土保持處理因子 P 值（依據水土保持技術規範第35條）。 Read query_r_factor_tool 查詢降雨沖蝕指數 R 值（依據水土保持技術規範第35條）。 Read query_runoff_coeff 逕流係數C值查詢工具（依據水土保持技術規範第18條）。 Read search_civil_regulations 智慧檢索《水土保持技術規範》。可以輸入條號（如「第18條」）或關鍵字。 Read suggest_slope_protection 坡面保護工法建議查詢（依坡度分級、土壤、降雨/地區自動查表）。 Read suggest_vegetation_slope 植生護坡設計建議。 Read utm_to_latlon 將 UTM 座標轉換為經緯度，只回傳 "緯度,經度" 字串（小數點下15位）。

FAQ

Questions about MCP Civil Tools

Is the MCP Civil Tools MCP server safe to use without restrictions? +

The MCP Civil Tools server is primarily read-only with 37 read tools. While it cannot modify data, an agent in a retry loop can make thousands of API calls per minute, exhausting rate limits and running up costs. Rate limiting is still recommended.

How many tools does the MCP Civil Tools MCP server expose? +

37 tools across 1 categories: Read. 37 are read-only. 0 can modify, create, or delete data.

How do I enforce a policy on MCP Civil Tools? +

Register the MCP Civil Tools MCP server in PolicyLayer, apply the suggested rules above (adjust the limits to your use case), and point your AI client at the PolicyLayer proxy URL instead of the server directly. Your agents keep the same tools; PolicyLayer evaluates every call against policy before it executes. Nothing to install, live in minutes.

Enforce policy on every MCP Civil Tools tool call.

Deterministic rules across all 37 MCP Civil Tools tools. Per-identity grants. Full audit log. Live in minutes. Nothing to install.

ENFORCE POLICY ON MCP CIVIL TOOLS →

Instant setup, no code required.

37 MCP Civil Tools tools catalogued and risk-classified — across an index of 43,000+ MCP servers.