TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD

Adds an existing label to a Trello card; idCard identifies the card and value is the ID of the label to add. Both card and label must already exist.

SERVERTrello SOURCEmcp-server-trello

Medium RISK CLASS

Category Write

Parameters 20 required

Recommended Rate-limitedsee the rule below

Registry record Grade F, identity unverified Pull the record →

This record as markdown: /tools/trello/trello-add-cards-id-labels-by-id-card.md

WHAT IT DOES

What TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD does on Trello

AI agents use TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD to create or update resources in Trello, usually the action step of a workflow, after the agent has gathered context. Every call changes real data in your Trello environment.

Parameter	Type	Required	Description
`value`	string	—	The ID of the label to add. Label IDs are typically 24-character hexadecimal strings.
`idCard`	string	—	The ID or shortLink of the Trello card. Card IDs are typically 24-character hexadecimal strings.

Parameters from the server's own tool schema.

RISK

Why TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD is rated Medium

This tool creates an association between an existing label and an existing card. It does not delete, execute external code, move money, or trigger destructive operations. The change is fully reversible (the label can be removed), making it a Write operation with low severity since label associations have minimal blast radius and do not affect core card content or board integrity.

From the tool's definition The tool 'Adds an existing label to a Trello card' — this modifies card metadata by attaching a label, which is a reversible write operation.

Attacks that exploit this kind of access

RECOMMENDED RULE

The rule that runs TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD safely

PolicyLayer is an MCP gateway: it sits between your AI agents and Trello, and checks every tool call against a rule you set before the call runs. Nothing changes on the server itself. For TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD, this is the rule to start with:

TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD Rate-limited

TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD stays usable, but capped: an agent stuck in a loop can't make hundreds of changes a minute. Everything else on the server is denied unless you say otherwise.

View as policy code

policy.json

{
  "version": "1",
  "default": "deny",
  "tools": {
    "TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD": {
      "limits": [
        {
          "counter": "trello_add_cards_id_labels_by_id_card_rate",
          "window": "minute",
          "max": 30,
          "scope": "grant"
        }
      ]
    }
  }
}

LIMIT THIS TOOL → Instant setup, no code required.

The button opens the PolicyLayer dashboard: create your workspace, connect Trello, apply this rule, and every TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD call is checked against it from then on.

FAQ

Questions about TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD

What does the TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD tool do? +

Adds an existing label to a Trello card; idCard identifies the card and value is the ID of the label to add. Both card and label must already exist. It is categorised as a Write tool in the Trello MCP Server, which means it can create or modify data. Consider rate limits to prevent runaway writes.

What parameters does TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD accept? +

TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD accepts 2 parameters: value, idCard. The full parameter table on this page comes from the server's own tool schema.

How do I enforce a policy on TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD? +

Register the Trello MCP server in PolicyLayer and add a rule for TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD: allow, deny, rate-limit, or require approval. Point your MCP client at the PolicyLayer proxy URL and the rule is enforced on every call, before it reaches Trello. Nothing to install.

What risk level is TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD? +

TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD is a Write tool with medium risk. Write tools should be rate-limited to prevent accidental bulk modifications.

Can I rate-limit TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD? +

Yes. Add a rate_limit block to the TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD rule in your PolicyLayer policy. For example, setting max: 10 and window: 60 limits the tool to 10 calls per minute. Rate limits are tracked per agent session and reset automatically.

How do I block TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD completely? +

Set action: deny in the PolicyLayer policy for TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD. The AI agent will receive a policy violation error and cannot call the tool. You can also include a reason field to explain why the tool is blocked.

What MCP server provides TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD? +

TRELLO_ADD_CARDS_ID_LABELS_BY_ID_CARD is provided by the Trello MCP server (mcp-server-trello). PolicyLayer sits as a proxy in front of this server to enforce policies before tool calls reach the server.

KEEP EXPLORING

More on Trello, and thousands of servers like it.

This server

All 200 Trello tools →

Across the catalogue

add-tag on Kanban MCP Server →kb_add on Persistent Kb →add_video on Mcptube Vision → The MCP Attack Database →

Guides

Govern customer-ops agents →Argument validation →Scoped token →