// SCAN REPORT

Vicon DataStream MCP Server

37 tools. 15 can modify or destroy data without limits.

15 write tools that can modify data. Rate limits recommended.

Last updated: 30 Jun 2026

15 can modify or destroy data

22 read-only

37 tools total

Community server · catalogue entry verified 30/06/2026

How to control Vicon DataStream MCP Server ↓

TOOL MAP

What Vicon DataStream MCP Server exposes to your agents

Read (22) Write / Execute (15) Destructive / Financial (0)

Running more than one server? Check your whole stack →

MOST DANGEROUS TOOLS

High Risk

The most dangerous Vicon DataStream MCP Server tools

Execute · Medium vicon_start_multicast_transmit The tool initiates a real-time data transmission operation on a motion capture server. Execute · Medium vicon_stop_multicast_transmit Stopping multicast transmission is an Execute action because it triggers a control operation that halts real-time data streaming from motion capture systems. Execute · Medium vicon_connect This tool initiates a TCP connection to a Vicon DataStream Server, which is an external operation that triggers a network connection and session establishment. Write · Medium vicon_clear_subject_filter This tool modifies the subject filter configuration of the Vicon DataStream system by clearing it, which changes the data streaming behavior to include all subjects.

15 of Vicon DataStream MCP Server's 37 tools can modify, destroy, or commit something on every call — and an agent calls them with no built-in limits.

POLICY

How to control Vicon DataStream MCP Server

PolicyLayer is an MCP gateway — it sits between your AI agents and Vicon DataStream MCP Server, and nothing reaches the server without passing your rules. These are the rules we recommend:

Rate limit write operations

{
  "vicon_add_subject_filter": {
    "limits": [
      {
        "counter": "vicon_add_subject_filter_per_hour",
        "window": "hour",
        "max": 30,
        "scope": "grant"
      }
    ]
  }
}

Prevents bulk unintended modifications from agents caught in loops.

Cap read operations

{
  "vicon_check_data_enabled": {
    "limits": [
      {
        "counter": "vicon_check_data_enabled_per_minute",
        "window": "minute",
        "max": 60,
        "scope": "grant"
      }
    ]
  }
}

Controls API costs and prevents retry loops from exhausting upstream rate limits.

Create a free account and register Vicon DataStream MCP Server — nothing to install.
Add these rules — paste them, or build them visually. Tune the limits to your setup.
Point your MCP client (Claude, Cursor, anything) at your gateway URL.

ENFORCE POLICY ON VICON DATASTREAM →

Instant setup, no code required.

FULL CATALOGUE

All 37 Vicon DataStream MCP Server tools

EXECUTE 3 tools

Execute vicon_connect 连接到 Vicon DataStream Server (TCP) Execute vicon_start_multicast_transmit 开始 Multicast 转发（Server 端操作） Execute vicon_stop_multicast_transmit 停止 Multicast 转发

WRITE 12 tools

Write vicon_add_subject_filter 添加主体到过滤器（只接收指定主体） Write vicon_clear_subject_filter 清除主体过滤器（接收所有主体） Write vicon_configure_wireless 配置无线网络适配器以优化数据流 Write vicon_connect_multicast 通过 Multicast 连接到 Vicon Server Write vicon_disable_data 禁用特定类型的数据流 Write vicon_disconnect 断开与 Vicon Server 的连接 Write vicon_enable_data vicon_enable_data Write vicon_set_apex_feedback 设置 Apex 设备触觉反馈 Write vicon_set_axis_mapping vicon_set_axis_mapping Write vicon_set_buffer_size 设置客户端缓冲区大小（帧数） Write vicon_set_stream_mode 设置数据流模式 Write vicon_set_timing_log 设置时序日志文件（用于调试延迟问题）

READ 22 tools

Read vicon_check_data_enabled 检查数据类型是否已启用 Read vicon_get_all_segments 获取主体的所有运动段数据 Read vicon_get_analog_voltage 获取力板模拟通道电压 Read vicon_get_axis_mapping 获取当前坐标系映射 Read vicon_get_camera_calibration 获取相机标定参数 Read vicon_get_cameras 获取相机列表 Read vicon_get_centroids 获取相机质心数据 Read vicon_get_devices 获取所有设备及其输出值 Read vicon_get_eye_tracker 获取眼动仪数据 Read vicon_get_eye_trackers 获取眼动仪列表 Read vicon_get_force_plates 获取力板数据 Read vicon_get_frame 获取最新帧数据（刷新内部缓冲区） Read vicon_get_frame_rates 获取所有可用的帧率信息 Read vicon_get_latency_samples 获取各阶段延迟样本详情 Read vicon_get_latency_total 获取总延迟（秒） Read vicon_get_markers 获取标记点数据 Read vicon_get_segment 获取特定运动段的完整姿态数据 Read vicon_get_server_orientation 获取服务器内部数据方向（Y-up 或 Z-up） Read vicon_get_status 获取完整连接状态 Read vicon_get_subjects 获取所有主体列表及其根段、质量分数 Read vicon_get_timecode 获取当前帧的时间码信息（时:分:秒:帧） Read vicon_get_unlabeled_markers 获取未标记标记点数据

EXPLORE

Related servers

Other MCP servers with similar tools — same risk classification, starter policies for each.

FAQ

Questions about Vicon DataStream MCP Server

How do I prevent bulk modifications through Vicon DataStream MCP Server? +

The Vicon DataStream MCP Server server has 12 write tools including vicon_add_subject_filter, vicon_clear_subject_filter, vicon_configure_wireless. Set a rate limit in your policy -- for example, 10 calls per hour prevents an agent from making more than 10 modifications per hour. PolicyLayer enforces this at the gateway, before calls reach Vicon DataStream MCP Server.

How many tools does the Vicon DataStream MCP Server MCP server expose? +

37 tools across 4 categories: Destructive, Execute, Read, Write. 22 are read-only. 15 can modify, create, or delete data.

How do I enforce a policy on Vicon DataStream MCP Server? +

Register the Vicon DataStream MCP Server MCP server in PolicyLayer, apply the suggested rules above (adjust the limits to your use case), and point your AI client at the PolicyLayer proxy URL instead of the server directly. Your agents keep the same tools; PolicyLayer evaluates every call against policy before it executes. Nothing to install, live in minutes.

Enforce policy on every Vicon DataStream MCP Server tool call.

Deterministic rules across all 37 Vicon DataStream MCP Server tools. Per-identity grants. Full audit log. Live in minutes. Nothing to install.

ENFORCE POLICY ON VICON DATASTREAM →

Instant setup, no code required.

37 Vicon DataStream MCP Server tools catalogued and risk-classified — across an index of 43,000+ MCP servers.